Poulan Pro PXT155G42 Operator's Manual
![Poulan Pro PXT155G42 Tractor manual cover](/images/DNiRNlnzHCmBJSwspfcSWQFf/thumbs/thumb175x175.webp)
To start the Poulan Pro PXT155G42 Tractor, ensure the parking brake is engaged, the PTO switch is off, and the transmission is in neutral. Insert the key and turn it to the start position. Release the key once the engine starts.
Use SAE 30 oil for temperatures above 32°F (0°C). For colder temperatures, SAE 5W-30 synthetic oil is recommended. Always check the manual for specific oil recommendations.
The air filter should be checked every 25 hours of operation and replaced if dirty or annually, whichever comes first.
If the tractor won't start, check the battery connections, ensure there is fuel, inspect the spark plug, and ensure the brake is engaged. Refer to the troubleshooting section of the manual for more guidance.
To adjust the cutting height, locate the height adjustment lever on the right fender and move it to the desired height position. Ensure the deck is level for an even cut.
Before winter storage, clean the tractor, perform an oil change, check and inflate tires, disconnect the battery, and add fuel stabilizer to the fuel tank. Store in a dry place.
To replace the mower blades, first disconnect the spark plug wire. Then, remove the deck, use a block to prevent blade rotation, and unscrew the blade bolts. Replace with new blades and tighten securely.
If the engine overheats, stop the tractor and let it cool. Check for debris blocking the cooling fins, ensure the engine is properly oiled, and verify the radiator is clean.
To check the transmission fluid, park the tractor on a level surface and remove the transmission dipstick. Wipe it clean, reinsert, and remove again to check the level. Add fluid as necessary to reach the correct level.
Yes, the Poulan Pro PXT155G42 Tractor is compatible with various attachments such as snow blowers, baggers, and tow-behind carts. Consult the manual or manufacturer’s website for a full list of compatible attachments.