Poulan Pro PT17 Operator's Manual

Pages 7

Year 2000

Language(s)

of 7

Poulan Pro PT17 Trimmer Specification

The Poulan Pro PT17 Trimmer is a versatile and robust gardening tool designed for efficient grass and weed trimming. This trimmer features a powerful 25cc, 2-cycle gas engine that provides ample power for tackling tough vegetation. It is engineered with a straight shaft design, offering extended reach for trimming under bushes and around obstacles, enhancing maneuverability and precision in challenging areas. The trimmer is equipped with a dual-line feed Tap 'N Go head, which facilitates quick line advancement, ensuring uninterrupted operation and improved cutting efficiency. Its 17-inch cutting width is optimized for both small and large yard tasks, making it suitable for a variety of trimming applications.

The PT17 Trimmer is constructed with a durable, lightweight frame, prioritizing user comfort and ease of handling during prolonged use. It includes an ergonomic handle design, reducing operator fatigue and allowing for better control and stability. The convenient spring-assisted SureFire starting system ensures quick and hassle-free engine ignition, minimizing downtime and maximizing productivity. Maintenance is straightforward, with easy access to key components for routine checks and servicing. This model is compatible with various attachments, enhancing its functionality and versatility for different landscaping tasks. The Poulan Pro PT17 Trimmer combines power, efficiency, and user-friendly features, making it an excellent choice for both residential and professional use in maintaining well-groomed lawns and gardens.

Poulan Pro PT17 Trimmer F.A.Q.

How do I start my Poulan Pro PT17 Trimmer?

To start your Poulan Pro PT17 Trimmer, ensure the trimmer is on a flat surface. Set the choke lever to the 'Start' position, press the primer bulb 6 times, and pull the starter rope briskly until the engine starts. Once started, move the choke lever to the 'Run' position.

What type of fuel should I use for the Poulan Pro PT17 Trimmer?

The Poulan Pro PT17 Trimmer requires a mix of gasoline and 2-cycle oil in a 40:1 ratio. Use unleaded gasoline with a minimum 87 octane rating and high-quality 2-cycle oil.

How do I replace the trimmer line on the Poulan Pro PT17?

First, ensure the trimmer is turned off and disconnected from the power source. Remove the spool by pressing the tabs on the side of the trimmer head. Wind the new line onto the spool, following the directional arrows, leaving about 6 inches of line free. Reattach the spool and ensure it is securely fastened.

Why does my Poulan Pro PT17 Trimmer keep stalling?

If your trimmer stalls, check the air filter for dirt or clogging, ensure the fuel is fresh, and inspect the spark plug for wear or damage. Cleaning or replacing these components often resolves stalling issues.

How often should I clean the air filter on my Poulan Pro PT17 Trimmer?

It is recommended to clean the air filter after every 5 hours of operation. Remove the filter, wash it with warm soapy water, let it dry, and reassemble. Replace the filter if it shows signs of damage or excessive dirt.

What is the correct spark plug gap for the Poulan Pro PT17 Trimmer?

The correct spark plug gap for the Poulan Pro PT17 Trimmer is 0.025 inches (0.635 mm). Ensure the spark plug is properly gapped before installation to maintain optimal engine performance.

How do I store my Poulan Pro PT17 Trimmer over the winter?

To store the trimmer over winter, drain the fuel tank and run the engine until it stops. Clean the trimmer thoroughly, remove any debris, and store it in a dry, cool place. Consider using a protective cover to prevent dust accumulation.

What should I do if my Poulan Pro PT17 Trimmer vibrates excessively?

Excessive vibration can be caused by a bent shaft or unbalanced trimmer head. Inspect for damage and replace any broken parts. Tighten loose screws and ensure the trimmer head is properly balanced.

How do I adjust the idle speed on my Poulan Pro PT17 Trimmer?

To adjust the idle speed, locate the idle speed screw on the carburetor. Turn the screw clockwise to increase idle speed and counterclockwise to decrease it. Adjust until the engine runs smoothly without the trimmer head moving.

Can I use my Poulan Pro PT17 Trimmer for edging?

Yes, the Poulan Pro PT17 Trimmer can be used for edging. Rotate the trimmer so that the cutting head is vertical to the ground, and carefully guide it along the edge you wish to trim. Ensure proper safety measures are followed during use.