Poulan Pro PRHT22i Operator's Manual

To start the Poulan Pro PRHT22i chainsaw, first ensure the battery is fully charged. Attach the battery pack, engage the chain brake, and press the safety lock button while squeezing the trigger to start the saw.
If the chain is not rotating, check the chain tension and ensure it is not too tight or too loose. Verify that the chain brake is not engaged and that the battery is charged.
To maintain battery life, store the battery in a cool, dry place, avoid overcharging, and charge it fully before using it. Use the battery regularly and avoid letting it deplete completely.
Use high-quality bar and chain oil specifically designed for chainsaws. This oil provides proper lubrication and protection for the chain and bar.
To tension the chain, loosen the bar nuts slightly, adjust the tension screw until the chain fits snugly against the bar but can still be pulled around by hand, and then re-tighten the bar nuts.
Sharpen the chain every time you refuel, or as needed if the chain shows signs of dullness. Ensure the cutters are sharpened at the correct angle for optimal performance.
Before each use, check the chain tension, ensure the chain and bar are lubricated, and inspect for any loose bolts or damage. Also, verify that the battery is fully charged.
After use, remove the battery and clean the chainsaw with a soft brush to remove sawdust and debris. Use a damp cloth to wipe the exterior and ensure the air vents are clear.
If the chainsaw does not start, check that the battery is charged and properly inserted. Ensure the safety lock and trigger are being pressed correctly. Inspect the chain brake to confirm it is disengaged.
To safely store the chainsaw, remove the battery and store it separately. Clean the chainsaw, cover the bar and chain with a protective sheath, and store it in a dry place away from direct sunlight and moisture.