Poulan Pro PR185H42STC Operator's Manual

To start the Poulan Pro PR185H42STC Tractor, ensure the parking brake is engaged, the PTO is disengaged, and the throttle is set to the choke position. Turn the ignition key to the start position and release it once the engine starts.
Check the fuel level, ensure the spark plug is functioning, and verify that the battery is charged. Also, ensure the air filter is clean and the fuel line is clear of obstructions.
Change the oil every 50 hours of operation or once per season, whichever comes first. Always use high-quality oil recommended by the manufacturer.
Use fresh, unleaded gasoline with an octane rating of at least 87. Avoid using gasoline with more than 10% ethanol.
Adjust the cutting height by using the height adjustment lever located next to the driver's seat. Move the lever to the desired position corresponding to your preferred grass height.
Common issues include the transmission slipping or not engaging properly. Check the drive belt for wear and proper tension, and ensure the transmission fluid is at the correct level.
Regularly inspect the blades for sharpness and damage. Sharpen the blades at least once per season and replace them if they are bent or severely worn.
Clean the tractor thoroughly, remove any debris, and drain the fuel system. Change the oil, lubricate moving parts, and store the tractor in a dry, covered area. Consider removing the battery and storing it separately.
To improve traction, consider using tire chains or wheel weights. Ensure the tires are properly inflated and are not overly worn.
Always wear appropriate safety gear including gloves and eye protection. Ensure the area is clear of people and obstacles before mowing. Follow all manufacturer's instructions and safety guidelines.