Poulan Pro PPB100E Operator's Manual
![Poulan Pro PPB100E Trimmer manual cover](/images/TJdWyVneerUINqbzWJfQOIPk/thumbs/thumb175x175.webp)
To start the Poulan Pro PPB100E Trimmer, ensure the battery is fully charged and properly installed. Press and hold the safety lock button, then squeeze the trigger to power on the trimmer.
Regular maintenance includes cleaning the trimmer after each use, checking for any loose parts, and inspecting the cutting head for damage. Battery maintenance involves charging it after each use and storing it in a cool, dry place.
To replace the line, ensure the trimmer is off and remove the spool cover. Wind new trimmer line onto the spool as per the directional arrows, then reattach the spool and cover securely.
If the trimmer is not starting, check if the battery is charged and correctly installed. Also, ensure the safety lock button is fully engaged when squeezing the trigger.
To clean the trimmer, remove any debris from the cutting head and body using a soft brush or cloth. Avoid using water directly on the motor and battery components.
If the trimmer line breaks frequently, ensure you are using the correct line size and type. Avoid trimming against hard surfaces and consider reducing the cutting speed.
It is not recommended to use the Poulan Pro PPB100E Trimmer in wet conditions to prevent electrical hazards and damage to the battery.
For off-season storage, clean the trimmer thoroughly, remove the battery, and store both in a dry, cool place away from direct sunlight.
Always wear protective gear such as gloves, safety goggles, and long pants. Keep bystanders at a safe distance and avoid using the trimmer near pets or children.
To extend battery life, charge it fully before use, avoid completely discharging it, and store it in a cool, dry place when not in use.