Poulan Pro PP136E Operator's Manual
![Poulan Pro PP136E Trimmer manual cover](/images/SpgUXhkVnqteKAoBnNPwjUhP/thumbs/thumb175x175.webp)
To start the Poulan Pro PP136E Trimmer, ensure it is plugged into a power source. Then, press and hold the trigger switch to start the motor. Release the trigger to stop the trimmer.
If the trimmer line won't advance, make sure the spool is wound correctly. Check for any tangles or jams in the line, and ensure the cap is secured properly. If problems persist, replace the spool.
To replace the trimmer line, remove the spool cap by pressing the tabs on the side. Take out the empty spool and wind new line onto it, following the directional arrows. Reinstall the spool and secure the cap.
Regular maintenance includes checking the trimmer line, cleaning the trimmer head, and inspecting the power cord for damage. Occasionally lubricate moving parts and ensure the air vents are clear of debris.
Excessive vibration can be caused by an improperly wound spool or a damaged trimmer head. Check the spool for even winding and inspect the trimmer head for cracks or damage. Replace any faulty parts.
Yes, the Poulan Pro PP136E can be used for edging. Adjust the trimmer head angle as needed and guide it along the edge of the lawn or pathway for a clean cut.
If the motor overheats, turn off the trimmer and unplug it. Allow it to cool down before resuming operation. Ensure air vents are not blocked and avoid prolonged continuous use to prevent overheating.
To improve cutting efficiency, ensure the trimmer line is the correct length and type. Regularly clean the trimmer head and replace the line when it becomes worn. Avoid cutting wet grass or heavy vegetation.
Some noise is normal due to the motor and cutting action. However, if the noise is unusual or excessively loud, check for loose parts or debris in the trimmer head, and inspect the motor for any issues.
Always wear protective eyewear and gloves when using the trimmer. Ensure the work area is clear of obstacles and bystanders. Do not operate the trimmer in wet conditions, and always follow the manufacturer's safety instructions.