Poulan Pro PP133 Operator's Manual
![Poulan Pro PP133 Trimmer manual cover](/images/eMwGFeKgfxzSgCcPWQupgoMH/thumbs/thumb175x175.webp)
To start the Poulan Pro PP133 Trimmer, ensure the unit is on a flat surface, move the choke lever to the full choke position, press the primer bulb 6 times, hold the trigger, and pull the starter rope until the engine starts.
The Poulan Pro PP133 Trimmer requires a 40:1 fuel mix ratio, which means mixing 3.2 ounces of 2-stroke oil with one gallon of unleaded gasoline.
To replace the trimmer line, remove the spool from the trimmer head, cut two 10-foot lengths of 0.095-inch trimmer line, insert the lines into the spool, wind them tightly in the direction indicated, and reattach the spool to the trimmer head.
If the engine won't start, check if the fuel is fresh, the spark plug is clean and properly gapped, the air filter is clean, and ensure the choke is properly set. Replace any damaged or worn parts.
To clean the air filter, remove the air filter cover, take out the filter, wash it with soap and water, let it dry completely, and then reinstall it. Replace it if it’s damaged.
The Poulan Pro PP133 Trimmer uses a Champion RCJ6Y spark plug. Ensure it is properly gapped at 0.025 inches for optimal performance.
Perform regular maintenance every 25 hours of use or at the start of each season. This includes checking the spark plug, cleaning the air filter, and inspecting the trimmer line and head.
The trimmer line may not feed properly if it is too short, tangled, or if the spool is not installed correctly. Ensure the line is wound correctly and the trimmer head is free from debris.
Yes, the Poulan Pro PP133 Trimmer is compatible with various attachments such as a blower, edger, or cultivator, allowing you to perform multiple yard tasks with one tool.
Always wear protective eyewear, gloves, and long pants when using the trimmer. Keep bystanders at a safe distance and be cautious of flying debris. Ensure the trimmer is turned off and cool before performing any maintenance.