Poulan Pro PO1538B Operator's Manual

To start the Poulan Pro PO1538B Tractor, ensure the parking brake is engaged, the blade lever is in the disengaged position, and the throttle is set to choke for a cold engine. Then, turn the ignition key to the start position until the engine fires.
The recommended oil for the Poulan Pro PO1538B Tractor is SAE 30 for temperatures above 32°F and SAE 5W-30 for temperatures below 32°F. Always check the manual for the most accurate information.
If the tractor won't start, check the battery connections for corrosion, ensure the fuel tank has gas, and inspect the spark plug for damage or wear. Also, make sure the safety interlocks are engaged correctly.
The air filter should be checked before each use and replaced if dirty or damaged. Generally, replace the air filter every 25 hours of operation or annually, whichever comes first.
The recommended tire pressure for the front tires is 14 psi, and for the rear tires, it is 10 psi. Always check the tire pressure when the tires are cold.
To maintain the blades, regularly inspect them for sharpness, balance, and any signs of damage. Sharpen the blades as needed, and replace them if there are significant dents or wear.
Excessive vibration may be caused by unbalanced or damaged blades, loose bolts, or worn bearings. Check and tighten any loose components and inspect the blades for balance and damage.
To adjust the cutting height, move the lever on the right side of the tractor to the desired position. The tractor has multiple height settings to accommodate various grass lengths.
If the steering feels loose, check for worn or damaged steering components, such as the tie rods or steering gear. Tighten any loose nuts or bolts and replace worn parts as necessary.
To store the tractor safely, clean it thoroughly, remove any debris, and drain the fuel tank or add a fuel stabilizer. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.