Poulan Pro PO1538A Operator's Manual
![Poulan Pro PO1538A Tractor manual cover](/images/mgyNUjITiuWcPMkmZmmWPCWr/thumbs/thumb175x175.webp)
Ensure the tractor is on a flat surface, sit on the seat, engage the parking brake, and turn the ignition key to start the engine.
Check the battery connections for corrosion, ensure the fuel tank has gas, and make sure the spark plug is functioning.
Warm up the engine, remove the oil drain plug, drain the old oil, replace the plug, and refill with new oil to the recommended level.
Sharpen the blades every 25 hours of use or at the start of each mowing season for optimal performance.
The recommended tire pressure is typically around 14 PSI for the front tires and 10 PSI for the rear tires, but check the manual for specific details.
Remove the air filter cover, take out the old filter, insert a new filter, and replace the cover securely.
Check the mower deck belt for wear or damage, inspect the PTO switch, and ensure the battery is sufficiently charged.
Use the height adjustment lever located near the seat to raise or lower the mower deck to the desired cutting height.
Excessive vibration could be due to unbalanced blades, worn bearings, or loose parts. Inspect and service these components as needed.
Clean the tractor, change the oil, remove the battery, add a fuel stabilizer to the gas tank, and store in a dry place.