Poulan Pro PLB26 Operator's Manual

Pages 24

Year 2020

Language(s)

of 24

Poulan Pro PLB26 Blower Specification

The Poulan Pro PLB26 Blower is a powerful and efficient handheld leaf blower designed for residential use. It features a robust 26cc two-cycle gas engine, which delivers high performance with a maximum air speed of 190 mph and an air volume of up to 430 cubic feet per minute. This combination ensures effective removal of leaves, debris, and grass clippings from lawns and driveways. The PLB26 is equipped with a user-friendly, simple start system that reduces the effort required to start the engine, enhancing usability for all users. Its lightweight design, weighing just over 9.5 pounds, and its ergonomic handle provide comfort during extended periods of operation, minimizing user fatigue. The blower also includes variable speed settings, allowing users to adjust the power output according to the task at hand for greater control and efficiency. Additionally, the PLB26 features a cruise control function that maintains a consistent air speed, making it easier to manage during prolonged use. The fuel tank is translucent, allowing for easy monitoring of fuel levels to avoid unexpected interruptions. Overall, the Poulan Pro PLB26 Blower combines power, efficiency, and ease of use, making it a practical choice for homeowners looking to maintain their outdoor spaces with minimal effort.

Poulan Pro PLB26 Blower F.A.Q.

How do I start the Poulan Pro PLB26 blower?

To start the Poulan Pro PLB26 blower, ensure it is on a flat surface. Set the choke lever to the "Full" position, press the primer bulb 6 times, pull the starter rope sharply until the engine starts, then set the choke to "Run".

What is the proper fuel mixture for the Poulan Pro PLB26 blower?

The Poulan Pro PLB26 blower requires a 40:1 fuel-to-oil mixture. Use fresh unleaded gasoline and high-quality 2-cycle synthetic oil.

How do I troubleshoot the blower if it won't start?

Ensure the fuel tank is filled with the correct 40:1 mixture, check the spark plug for fouling, ensure the air filter is clean, and verify that the choke and throttle settings are correct.

What maintenance tasks are necessary for the Poulan Pro PLB26 blower?

Regularly clean the air filter, inspect the spark plug, check for loose bolts, and ensure the fuel system is free of deposits. Replace parts as needed.

How do I adjust the carburetor on the Poulan Pro PLB26 blower?

Locate the carburetor adjustment screws. Turn the idle screw clockwise to increase RPMs or counterclockwise to decrease. Adjust the high and low-speed screws for optimal performance.

What should I do if the blower is vibrating excessively?

Check for loose screws or bolts, inspect the fan for damage or debris, and ensure that the blower tube is securely attached.

How do I store the blower for long periods?

Empty the fuel tank, clean the blower, remove the spark plug and add a few drops of oil into the cylinder, and store it in a dry, cool place.

Can I use regular automotive oil in the blower?

No, you should use high-quality 2-cycle engine oil. Automotive oil does not mix properly in air-cooled engines like the PLB26 blower.

What is the weight of the Poulan Pro PLB26 blower?

The Poulan Pro PLB26 blower weighs approximately 9.5 pounds, making it lightweight and easy to handle.

How do I replace the spark plug on the blower?

Disconnect the spark plug wire, remove the old spark plug using a wrench, and install a new one. Ensure the gap is set to the manufacturer’s specifications before reconnecting the wire.