Poulan Pro PKGTH2554 Operator's Manual
![Poulan Pro PKGTH2554 Tractor manual cover](/images/YqRcHdQrcRbScXInNdCOdLVw/thumbs/thumb175x175.webp)
To start the Poulan Pro PKGTH2554, ensure the PTO switch is off, sit on the seat, set the parking brake, and turn the ignition key to start the engine.
Check the battery connections, ensure the PTO is disengaged, and verify that the brake is set properly. If the problem persists, examine the fuel level and spark plug condition.
Change the oil every 50 hours of operation or at least once per season, whichever comes first. Use SAE 30 oil for the best performance.
The recommended tire pressure for the Poulan Pro PKGTH2554 is 14 PSI for the front tires and 10 PSI for the rear tires.
Check the mower deck for levelness, inspect the blades for sharpness and damage, and ensure the tire pressure is even on all sides.
Inspect the belts for wear and tension regularly. Replace any belts showing signs of wear or damage to ensure optimal performance.
Remove the air filter cover, take out the air filter, and clean it with warm soapy water. Let it dry completely before reinstalling.
Excessive vibration could be due to unbalanced blades, damaged pulleys, or loose hardware. Check these components and tighten or replace as necessary.
Use unleaded gasoline with a minimum octane rating of 87. Avoid ethanol blends greater than 10% to prevent engine damage.
Keep the battery terminals clean and free of corrosion, charge the battery during long periods of inactivity, and store the tractor in a cool, dry place.