Poulan Pro PD18H42STA Operator's Manual
![Poulan Pro PD18H42STA Tractor manual cover](/images/aTbKxUyQRBRSytYZXTcNQIpp/thumbs/thumb175x175.webp)
To start the Poulan Pro PD18H42STA Tractor, ensure the parking brake is engaged, the PTO is disengaged, and the transmission is in neutral. Insert the key into the ignition and turn it to the start position.
Use SAE 30 motor oil for temperatures above 32°F (0°C) and SAE 5W-30 for temperatures below 32°F (0°C). Always check the oil level before use and change it as per the maintenance schedule.
Check the battery connections for corrosion, ensure the fuel tank is filled, and inspect the spark plug for wear. Additionally, verify that all safety switches are operational.
The recommended tire pressure for the front tires is 14 PSI and for the rear tires is 10 PSI. Regularly check and adjust the tire pressure to ensure optimal performance.
Sharpen the blades after every 25 hours of use or more frequently if you notice the grass is not cutting cleanly. Always follow safety procedures when removing and sharpening blades.
Check the drive belt for wear or damage and ensure the tire pressure is even. If the problem persists, inspect the transmission and axles for any signs of trouble.
Remove the air filter cover, take out the filter, and gently tap it to remove any dust and debris. If the filter is excessively dirty, wash it with soap and water, dry thoroughly, and reinstall.
Ensure the blades are sharp and balanced, the deck is clean and level, and the engine is running at full throttle. Also, mow when the grass is dry for the best results.
Perform an oil change every 50 hours, clean or replace the air filter every 25 hours, and check the blades, belts, and tires regularly. Refer to the user manual for a detailed schedule.
Clean the tractor thoroughly, change the oil, and stabilize the fuel. Disconnect the battery and store it in a dry place. Cover the tractor to protect it from dust and moisture.