Poulan Pro PC1538D Operator's Manual
![Poulan Pro PC1538D Tractor manual cover](/images/QovHIqAFeQTlzUuWjqmSrBTl/thumbs/thumb175x175.webp)
To change the oil, first run the engine for a few minutes to warm it up. Turn off the engine and disconnect the spark plug wire. Place an oil pan under the oil drain valve, and open the valve to drain the old oil. Close the valve, replace the oil filter, and refill with new oil according to the specifications in the manual.
The Poulan Pro PC1538D Tractor requires unleaded gasoline with an octane rating of at least 87. Avoid using gasoline with more than 10% ethanol content.
To adjust the cutting height, locate the height adjustment lever on the tractor. Move the lever to the desired position, which is marked with numbers indicating the cutting height in inches.
If the tractor won't start, check the fuel level and ensure the fuel is fresh. Verify that the spark plug is connected and in good condition. Check the battery charge and clean the battery terminals if necessary. Ensure the choke is in the correct position for starting.
Blades should be sharpened at least once per mowing season or after every 25 hours of use. If you notice uneven cutting or torn grass, the blades may need sharpening sooner.
The recommended tire pressure for the front tires is 14 psi, and for the rear tires, it is 10 psi. Always check the tire pressure when the tires are cold.
To replace the drive belt, first disengage the mower blades and disconnect the spark plug. Remove the deck and locate the drive belt. Release the tension on the belt by adjusting the tensioner, remove the old belt, and install the new one following the belt routing diagram. Reassemble and test the tractor.
Overheating can be caused by a clogged air filter, low engine oil, or debris blocking the engine cooling fins. Check and clean the air filter, ensure the oil level is correct, and clean any debris from the cooling fins.
For winter storage, clean the tractor thoroughly and remove any grass or debris. Drain the fuel tank or add a fuel stabilizer. Change the oil and oil filter, and remove the battery, storing it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
Regular maintenance includes checking the oil level before each use, cleaning the air filter every 25 hours of operation, sharpening the blades as needed, and checking tire pressure regularly. Lubricate all moving parts as indicated in the manual.