Poulan Pro PB200 Operator's Manual

Pages 17

Year 2006

Language(s)

of 17

Poulan Pro PB200 Trimmer Specification

The Poulan Pro PB200 Trimmer is a robust outdoor power tool designed for efficient trimming and edging tasks. Engineered with a focus on performance and user convenience, this trimmer is equipped with a 25cc, 2-cycle gas engine that delivers reliable power for tackling dense grass and overgrown areas. It features a straight shaft design, providing extended reach for accessing hard-to-reach spots and a balanced weight distribution for enhanced maneuverability.

The cutting system employs a dual-line feed, which increases cutting efficiency and ensures a clean, precise cut. The trimmer's cutting width spans 17 inches, allowing users to cover more ground in less time, making it ideal for medium to large-sized lawns. For ease of operation, the Poulan Pro PB200 incorporates a spring-assisted start system to reduce the effort required for engine ignition, ensuring a quick and reliable start-up every time.

Durability is a key focus, with the trimmer constructed from high-quality materials designed to withstand the demands of regular use. The ergonomic handle design enhances comfort during extended periods of operation, reducing user fatigue. Additionally, the lightweight construction of the trimmer, coupled with its optimized design, facilitates easy handling and precise control.

Maintenance is straightforward, with an accessible air filter and a translucent fuel tank that allows for quick checks of fuel levels. The Poulan Pro PB200 Trimmer combines power, efficiency, and user-friendly features, making it a versatile tool for maintaining a well-kept lawn and garden. Its performance and durability make it a valuable addition to any homeowner's garden equipment collection.

Poulan Pro PB200 Trimmer F.A.Q.

How do I start my Poulan Pro PB200 Trimmer?

To start the Poulan Pro PB200 Trimmer, ensure the stop switch is in the "ON" position. Prime the engine by pressing the primer bulb several times until fuel is visible. Set the choke lever to the full choke position. Pull the starter rope until the engine attempts to start, then move the choke to the half-choke position and pull again until the engine starts.

What should I do if my trimmer line is not advancing?

If the trimmer line is not advancing, check that the line is not too short or tangled inside the head. Ensure the line is wound correctly and the spool is not jammed. If necessary, replace the trimmer line with a new one according to the manufacturer's instructions.

How often should I clean the air filter?

The air filter on your Poulan Pro PB200 should be checked and cleaned after every 5 hours of operation. If the filter is damaged or heavily soiled, replace it to ensure optimal performance.

What is the recommended fuel mixture for this trimmer?

The Poulan Pro PB200 Trimmer requires a fuel mixture of 40:1, meaning 3.2 ounces of high-quality 2-cycle engine oil per gallon of unleaded gasoline. Always mix thoroughly before use.

How can I troubleshoot if the engine won't start?

If the engine won't start, check that there is fresh, properly mixed fuel in the tank. Ensure the spark plug is clean and properly gapped. Inspect the air filter for clogs and verify that the choke is set correctly.

What maintenance should be performed regularly?

Regular maintenance includes checking and cleaning the air filter, inspecting and replacing the spark plug as needed, ensuring the trimmer line is in good condition, and cleaning the exterior of the trimmer to prevent debris buildup.

Why is my trimmer vibrating excessively?

Excessive vibration can be caused by an unbalanced trimmer head or loose components. Check that the trimmer head is properly balanced and inspect for any loose screws or parts. Tighten any loose components.

How can I replace the spark plug?

To replace the spark plug, disconnect the spark plug wire and remove the old spark plug with a spark plug wrench. Install a new spark plug and ensure it is properly gapped according to the manufacturer's specifications, then reconnect the spark plug wire.

What should I do if the trimmer is smoking?

If the trimmer is smoking, it may be due to an improper fuel mixture or a clogged air filter. Check and replace the air filter if necessary, and ensure you're using the correct 40:1 fuel mixture.

How do I store the trimmer during the off-season?

For off-season storage, empty the fuel tank and run the engine until it stops to clear the carburetor. Clean the trimmer and inspect it for any needed repairs. Store the trimmer in a dry, well-ventilated area away from direct sunlight.