Poulan Pro P627ES Operator's Manual
![Poulan Pro P627ES Snow Thrower manual cover](/images/vcZnQFsURFJBIIABfyKSovMN/thumbs/thumb175x175.webp)
To start the Poulan Pro P627ES, ensure the fuel tank is filled with fresh gasoline, the oil level is adequate, and the choke is set to the 'ON' position. Pull the starter handle or use the electric start button if available. Once the engine starts, gradually move the choke to the 'OFF' position.
For optimal performance, use a high-quality 5W-30 motor oil. Check the oil level regularly and change it according to the maintenance schedule outlined in the user manual.
If the snow thrower doesn't start, check the fuel level and ensure it's fresh. Verify that the spark plug is in good condition and connected properly. Examine the choke and throttle settings. If issues persist, consult the manual for further troubleshooting steps or contact customer support.
Conduct a general inspection before each use. Change the oil every 25 hours of operation or at the beginning of each season. Clean the air filter regularly and replace the spark plug annually. Check and adjust the belts and auger drive system as needed.
To store the snow thrower, drain the fuel tank or add a fuel stabilizer. Clean the machine thoroughly to remove dirt and debris. Lubricate moving parts and store the machine in a dry, covered area. Disconnect the spark plug to prevent accidental starting.
Check for any clogs in the chute or auger. Ensure the auger is engaged and that the belt is not slipping. Inspect the auger and impeller blades for wear or damage. Adjust or replace components as necessary.
Yes, you can use the Poulan Pro P627ES on gravel driveways. Adjust the skid shoes to raise the auger housing slightly to prevent picking up gravel. This will help to avoid damage to the machine and the driveway surface.
To adjust the skid shoes, loosen the mounting nuts and set the skid shoes to the desired height. Ensure both sides are evenly adjusted to maintain balance and prevent uneven wear. Tighten the nuts securely once adjusted.
Always wear appropriate clothing, including gloves and safety goggles. Keep a safe distance from the discharge chute and avoid wearing loose clothing. Never attempt to clear clogs while the machine is running. Turn off the engine and remove the ignition key before performing maintenance.
Replace the spark plug at the start of each season or after every 100 hours of operation. Regular replacement ensures easy starting and optimal engine performance. Use the spark plug type specified in the user manual.