Poulan Pro CHDF550E Operator's Manual
![Poulan Pro CHDF550E Tiller manual cover](/images/HUsqJMvcLVzfHcyBOQDQpKCs/thumbs/thumb175x175.webp)
To start the Poulan Pro CHDF550E Tiller, ensure the tiller is on a flat surface. Check that the power cord is securely connected to a power source. Set the throttle to the 'start' position, then press the start button.
If the tiller does not start, check the power cord and outlet for connectivity. Ensure the throttle is in the correct position, and check for any blown fuses or tripped circuit breakers.
It is recommended to change the oil in the Poulan Pro CHDF550E Tiller after the first 5 hours of use, and then every 25 hours of use or at the start of each season thereafter.
Use SAE 30 oil for the Poulan Pro CHDF550E Tiller in temperatures above 40°F (4°C). For cooler temperatures, use SAE 5W-30.
Regularly inspect the tines for wear or damage. Clean them after every use to prevent rust and remove debris. Sharpen or replace worn tines as necessary.
Excessive vibration may be caused by damaged tines or loose parts. Inspect the tines for damage and tighten any loose bolts or screws.
Clean the tiller thoroughly, remove any fuel, and store it in a dry place. Cover the tiller to protect it from dust and moisture.
Always wear appropriate safety gear, such as gloves and goggles. Keep bystanders and pets away from the tiller while it is in use. Avoid using the tiller on wet or uneven ground.
Adjust the tilling depth by setting the drag stake to your desired depth. Lift or lower the stake to increase or decrease the tilling depth, and secure it in place.
If the tiller stops unexpectedly, check for obstructions in the tines. Ensure that the power cord is intact and that the circuit breaker has not tripped.