Poulan Pro 260 Operator's Manual

Pages 17

Year 2002

Language(s)

of 17

Poulan Pro 260 Chainsaw Specification

The Poulan Pro 260 Chainsaw is engineered for durability and performance, catering to both professional and home users. It features a robust 42cc two-cycle gas engine that provides ample power for cutting through tough wood with efficiency. The chainsaw is equipped with a 20-inch bar, which offers an optimal balance between reach and maneuverability, making it suitable for a variety of cutting tasks from felling trees to trimming branches.

The Poulan Pro 260 incorporates an advanced anti-vibration system designed to reduce operator fatigue during extended use, ensuring comfort and precision. Its automatic chain oiler delivers a steady supply of lubrication to the bar and chain, enhancing cutting performance and extending the life of the chain. Additionally, the chainsaw is fitted with a super clean air filter system that improves engine life by keeping debris out, reducing maintenance frequency.

For user safety, the chainsaw includes a chain brake that activates in response to kickback, providing an extra layer of protection. The ergonomic design is complemented by a comfortable handle and an intuitive layout that facilitates easy access to controls for improved handling. The Poulan Pro 260 also features a convenient tool-free chain tensioning system, allowing for quick adjustments on the go to maintain optimal chain tension.

Weighing approximately 13 pounds, the chainsaw strikes a balance between portability and power. This model is ideal for users seeking a reliable and efficient machine capable of handling demanding tasks with ease. Its blend of power, safety features, and user-friendly design makes the Poulan Pro 260 a versatile choice for diverse cutting applications.

Poulan Pro 260 Chainsaw F.A.Q.

How do I start the Poulan Pro 260 Chainsaw?

To start the Poulan Pro 260 Chainsaw, ensure that the chain brake is engaged, set the choke to the full position, prime the engine by pressing the primer bulb several times, pull the starter rope until the engine fires, then set the choke to half and pull again until the engine starts.

What is the recommended maintenance schedule for the Poulan Pro 260 Chainsaw?

Regular maintenance includes cleaning the air filter after every 5 hours of use, checking and tightening the chain regularly, changing the spark plug annually, and sharpening the chain as needed.

How do I troubleshoot a Poulan Pro 260 Chainsaw that won't start?

Check for fuel issues by ensuring the tank has fresh gasoline and the fuel filter isn't clogged. Inspect the spark plug for fouling and replace if necessary. Verify that the air filter is clean and the carburetor is not clogged.

What type of fuel should I use for the Poulan Pro 260 Chainsaw?

Use a fresh unleaded gasoline with a minimum octane rating of 87 and mix it with 2-cycle synthetic oil at a 50:1 ratio.

How do I adjust the chain tension on the Poulan Pro 260 Chainsaw?

Loosen the bar nuts slightly, use the tensioning screw to adjust the chain tension until there's a small amount of slack but the chain fits snugly against the guide bar, then re-tighten the bar nuts.

What should I do if the Poulan Pro 260 Chainsaw chain is not cutting properly?

Ensure the chain is sharp and properly tensioned. Check for any damage or dullness and sharpen the chain or replace it if necessary. Also, verify that the chain is installed in the correct direction.

How can I safely clean the Poulan Pro 260 Chainsaw after use?

Turn off the chainsaw and disconnect the spark plug. Use a soft brush or cloth to remove debris from the chain and guide bar. Clean the air filter and the cooling fins on the engine.

What is the function of the chain brake on the Poulan Pro 260 Chainsaw?

The chain brake is a safety feature designed to stop the chain immediately in the event of kickback or if the operator's hand pushes the guard forward. It helps prevent injuries.

How do I replace the spark plug on the Poulan Pro 260 Chainsaw?

Disconnect the spark plug wire, use a spark plug wrench to remove the old spark plug, and install a new spark plug, ensuring it is gapped correctly. Reconnect the spark plug wire.

What should I check if the chain oil is not dispensing on the Poulan Pro 260 Chainsaw?

Inspect the oil reservoir to ensure it is full. Check the oil pump and oil outlet for blockages, and clean them if necessary. Verify that the oil filter is not clogged.