Poulan Pro 2150PR Operator's Manual V2

Pages 18

Year 2020

Language(s)

of 18

Poulan Pro 2150PR Chainsaw Specification

The Poulan Pro 2150PR Chainsaw is engineered for both home and professional use, offering a robust combination of power and efficiency. It is equipped with a 2-stroke gas-powered engine that delivers reliable performance for cutting tasks. The engine displacement is 36cc, providing ample power for handling medium to heavy-duty cutting jobs with ease. The chainsaw features a 16-inch bar and chain, which is optimal for a variety of cutting needs, from trimming limbs to cutting through larger logs.

Designed with user comfort in mind, the Poulan Pro 2150PR includes an anti-vibration handle that reduces user fatigue during extended periods of operation, enhancing overall control and maneuverability. The automatic chain oiler ensures the chain remains lubricated, reducing wear and extending the life of the bar and chain. For safety, the chainsaw is equipped with an inertia-activated chain brake that stops the chain in the event of kickback, providing an additional layer of protection for the user.

Starting the chainsaw is made easier with its primer bulb and choke system, which facilitates quick starts in various weather conditions. The air filter is accessible and easily replaceable, ensuring the engine receives clean air for optimal performance. The Poulan Pro 2150PR’s design also facilitates easy maintenance, with a tool-less chain tensioning system that allows for swift adjustments to the chain tension. Overall, this chainsaw is a reliable tool tailored for users who require a balance between power, safety, and ease of use for a wide range of cutting tasks.

Poulan Pro 2150PR Chainsaw F.A.Q.

How do I start the Poulan Pro 2150PR chainsaw?

To start the Poulan Pro 2150PR chainsaw, ensure the chain brake is engaged, switch on the ignition, press the primer bulb 6 times, set the choke to full, pull the starter rope until the engine fires, then move the choke to half and pull the rope again until the engine starts.

Why does the chain on my Poulan Pro 2150PR keep coming off?

A chain coming off can be due to improper tension. Ensure the chain is properly tensioned by adjusting the tensioner screw. The chain should be snug against the bar but still move freely.

What type of fuel should I use for the Poulan Pro 2150PR?

Use a gasoline and 2-cycle oil mix at a ratio of 40:1. It's recommended to use fresh unleaded gasoline with a minimum octane rating of 87.

How do I properly sharpen the chain on my Poulan Pro 2150PR?

To sharpen the chain, use a round file and a file guide. File each cutter at a consistent angle, usually 30 degrees, and ensure all cutters are filed evenly.

What should I do if the Poulan Pro 2150PR won't start?

Check for fuel, ensure the spark plug is clean and functioning, verify that the air filter is clean, and confirm that the choke is in the correct position.

How do I maintain the air filter on my Poulan Pro 2150PR chainsaw?

Regularly inspect the air filter and clean it by removing dust and debris. If it's too dirty, replace it with a new one to maintain optimal performance.

Why does my Poulan Pro 2150PR chainsaw lose power during cuts?

Power loss can be caused by a dull chain, a clogged air filter, or improper fuel mixture. Sharpen the chain, clean or replace the air filter, and ensure the correct fuel mix is used.

How often should I lubricate the chain on my Poulan Pro 2150PR?

Ensure the chain is lubricated before each use. Refill the chain oil reservoir regularly and check that the oiler is functioning properly during operation.

What is the correct way to store my Poulan Pro 2150PR chainsaw?

After use, clean the chainsaw thoroughly, drain the fuel, remove the chain and guide bar, and store them in a dry place. Apply a light coat of oil to prevent rust.

How do I replace the spark plug on the Poulan Pro 2150PR?

To replace the spark plug, remove the top cover, disconnect the spark plug wire, use a spark plug wrench to remove the old plug, and install a new one with the correct gap setting.