Olympus VN-120 Instructions Manual
![Olympus VN-120 manual cover](/images/pUKTHXyLYjxDgAkhGVtwOdke/thumbs/thumb175x175.webp)
To start recording, turn on the device by sliding the power switch to 'ON', press the 'REC' button, and speak into the microphone. The recording LED light will illuminate to indicate recording is in progress.
Press the 'STOP' button to stop recording, then use the 'REW' or 'FF' button to navigate to the desired file. Press the 'PLAY' button to start playback.
Ensure that the battery is inserted correctly and has sufficient charge. If the device still does not turn on, replace the battery with a new one.
To delete a file, select the file using the 'REW' or 'FF' button, then press the 'ERASE' button twice. The display will show 'ERASE' and then 'YES' to confirm deletion.
The Olympus VN-120 does not have direct USB connectivity. You can transfer your recordings using an auxiliary cable connected to your computer's microphone input and recording software.
The Olympus VN-120 offers a maximum recording time of approximately 2 hours in HQ mode and up to 8 hours in LP mode.
For better sound quality, record in a quiet environment and speak directly into the microphone. Using the HQ mode will also provide higher audio quality.
Check if the volume is turned up by pressing the 'VOL' button. Ensure that headphones or external speakers are not connected if you wish to use the built-in speaker.
Yes, you can use rechargeable NiMH batteries. However, be sure to recharge them using an external charger as the device does not support in-device charging.
Keep the device clean and free from dust. Store it in a cool, dry place when not in use. Regularly check and replace batteries to prevent leakage.