Olympus PT-EP03 Instructions Manual
![Olympus PT-EP03 manual cover](/images/OEbfLSkEKmoIjXXSZxouPjoV/thumbs/thumb175x175.webp)
Before diving, always inspect the O-ring for any debris or damage. Ensure it is clean and lightly lubricated. Close the case and perform a visual check to ensure the O-ring sits evenly in its groove without any twists.
The Olympus PT-EP03 underwater housing is rated for depths up to 40 meters (approximately 130 feet).
To prevent fogging, ensure the interior of the case is dry before sealing it. Use moisture-absorbing silica gel packs inside the case, and avoid opening the case in humid environments.
Rinse the case in fresh water after each dive to remove salt and debris. If buttons are stuck, soak the case in warm, fresh water and gently work the buttons to free them. Avoid using excessive force.
The PT-EP03 case is specifically designed for the Olympus PEN E-PL2 camera. Using it with other models is not recommended as it may not fit properly or allow full functionality.
Regularly inspect the O-ring for nicks or tears. Clean it with a soft cloth and apply a thin layer of silicone grease to keep it supple. Store it in a cool, dry place away from direct sunlight when not in use.
Yes, it is advised to perform a leak test without the camera by submerging the case in water to check for any leaks. This should be done before each dive trip to ensure the case’s integrity.
The PT-EP03 case supports various accessories such as external flash units, lenses, and lighting arms specifically designed for underwater use. Ensure compatibility with the case before purchasing.
Rinse the case thoroughly in fresh water to remove salt and sand. Use a soft cloth to gently wipe the exterior and allow it to air dry completely before opening it.
Yes, the PT-EP03 case is suitable for use in both saltwater and freshwater environments. Just ensure to rinse it thoroughly with fresh water after each use in saltwater to prevent corrosion.