Olympus VG-170 Instructions Manual
![Olympus VG-170 manual cover](/images/dzZFRUQdxEmgCQkWWPECCNVN/thumbs/thumb175x175.webp)
To turn on the Olympus VG-170 camera, press the power button located on the top of the camera. The lens will extend, and the LCD screen will display the startup screen.
Connect the camera to your computer using a USB cable. Ensure the camera is powered on, and your computer should recognize it as a removable drive. You can then copy and paste photos to your desired folder.
Ensure the lens is clean from dirt or smudges. Try switching to a different focus mode or manually adjust the focus if available. If issues persist, reset the camera settings to default.
To reset your Olympus VG-170, go to the menu, select the 'Setup' tab, and choose 'Reset.' Confirm your choice to restore all settings to factory defaults.
The Olympus VG-170 is compatible with SD, SDHC, and SDXC memory cards. Ensure you're using a card with sufficient speed and capacity for your needs.
To extend battery life, reduce the use of the LCD screen, turn off the camera when not in use, and avoid using flash unless necessary. Also, keep the battery contacts clean.
Ensure the battery is correctly inserted. Check for any dirt or obstructions in the battery compartment. If the issue persists, try a different battery or contact Olympus support.
To change the shooting mode, press the 'Mode' button on the back of the camera and use the arrow keys to select your desired mode. Press 'OK' to confirm.
Yes, the Olympus VG-170 can record videos. Switch to video mode using the mode dial and press the shutter button to start and stop recording.
Check if the image stabilization is turned on. Ensure you are holding the camera steady, or use a tripod. Adjust the focus settings and ensure adequate lighting.