Olympus TG-6 Instructions Manual
![Olympus TG-6 manual cover](/images/CJKOoVHYimYEnTSsnNbNlViN/thumbs/thumb175x175.webp)
To set up the Olympus TG-6 for underwater photography, use the Underwater Mode by turning the mode dial to the fish icon. This mode automatically adjusts white balance and exposure settings for underwater conditions. Consider using the optional PT-059 underwater housing for deeper dives.
For fast-moving subjects, use the Sport Mode by selecting the running figure icon on the mode dial. This mode optimizes shutter speed to capture fast action. Additionally, enable the continuous shooting feature to capture a series of shots quickly.
To transfer photos wirelessly, install the Olympus Image Share app on your smartphone. Enable Wi-Fi on the TG-6, connect to the camera's Wi-Fi network through your phone, and use the app to access and transfer your photos.
If the lens gets stuck, try turning the camera off and on again. Ensure the battery is charged. If the issue persists, check for debris around the lens barrel and gently clean it. If these steps do not resolve the issue, contact Olympus support.
To update the firmware, download the Olympus Workspace software on your computer. Connect the TG-6 via USB, launch the software, and follow the prompts to check for and install any available firmware updates.
After using the TG-6 in saltwater, rinse it with fresh water to remove salt deposits. Dry the camera thoroughly with a soft cloth. Ensure the battery compartment and other openings are sealed before rinsing. Regularly check and clean the o-rings in the battery compartment to maintain water resistance.
To extend battery life, reduce the LCD screen brightness and turn off Wi-Fi when not in use. Use the Quick Sleep mode to minimize power consumption when the camera is idle. Carry a spare battery for long shoots.
To reset the TG-6 to factory settings, go to the Setup Menu, select 'Reset', and confirm your choice. This will restore all settings to their defaults except for date, time, and language.
Yes, the TG-6 can shoot in RAW format. To enable RAW shooting, press the Menu button, navigate to the Image Quality settings, and select RAW or RAW+JPEG as your preferred format.
To use the Microscope Mode, turn the mode dial to the microscope icon. This mode allows you to capture extreme close-ups and magnify subjects up to 44.5x. Use the zoom lever to adjust magnification and ensure proper focus by using a tripod or stabilizing the camera.