Olympus Stylus Tough-6010 Instructions Manual
![Olympus Stylus Tough-6010 manual cover](/images/BXnXnkjDPSCDEFUvArFtbjfo/thumbs/thumb175x175.webp)
The Olympus Stylus Tough-6010 is inherently waterproof. Ensure all compartment covers and battery doors are securely closed before submerging the camera in water.
Connect the camera to your computer using a USB cable. Ensure the camera is turned on, and your computer should recognize it as a removable drive. Use file explorer to transfer photos.
To reset to factory settings, go to the camera menu, select 'Setup', then choose 'Reset' and confirm your selection.
Allow the camera to dry in a warm, dry place. Avoid opening any compartments until it is fully dry to prevent moisture from entering the interior.
Remove the battery from the camera and insert it into the provided charger. Plug the charger into a power outlet. The charging indicator will show when the battery is fully charged.
Rinse the camera with fresh water immediately after use in saltwater. Ensure all covers are closed and dry the camera thoroughly with a soft cloth.
Check if the battery is charged and inserted correctly. If the problem persists, try using a different battery or contact customer support.
Use the mode dial on the top of the camera to switch between different shooting modes such as Auto, Scene, or Program.
Ensure that the camera is dry and free from debris. Power cycle the camera by removing and reinserting the battery. If the issue persists, service may be required.
Yes, the camera is designed to function in cold environments. However, battery performance may decline, so keep spares warm until use.