Olympus PT-EP05L Instructions Manual
![Olympus PT-EP05L manual cover](/images/hvBimPXyJPqcPBoEGkwkljwL/thumbs/thumb175x175.webp)
Ensure your camera is turned off. Open the case by releasing the latches. Place the camera inside the case, aligning it with the controls. Carefully close the case and secure the latches to ensure a waterproof seal.
If the case fogs up, surface safely and open the case in a dry environment to eliminate any moisture. Ensure the O-ring is properly lubricated and there is no debris that might compromise the seal.
Regularly inspect the O-ring for any signs of wear or debris. Clean it with fresh water and apply a thin layer of silicone grease to keep it flexible and ensure a watertight seal.
Yes, the PT-EP05L Case has a fiber optic cable port for connecting external strobes, enhancing underwater photography lighting.
The Olympus PT-EP05L Case is designed for use up to 40 meters (approximately 130 feet) underwater.
Use a lens port cover when the case is not in use, and avoid placing the case on rough surfaces. Rinse with fresh water after use to remove any abrasive particles.
Immediately remove the camera from the case and dry it thoroughly. Inspect the case for any damage or debris on the O-ring or sealing surfaces. Perform a leak test before next use.
Yes, the PT-EP05L Case is suitable for use in both fresh and saltwater environments. Rinse thoroughly with fresh water after saltwater use to prevent corrosion.
Before placing your camera inside, close the empty case and submerge it in water. Check for any bubbles escaping, which indicate a compromised seal.
Use mild soap and water for cleaning the case. Avoid solvents or harsh chemicals that may damage the plastic or O-ring. Rinse thoroughly with fresh water after cleaning.