Olympus PT-032 Instructions Manual
![Olympus PT-032 manual cover](/images/xMcuskuOQkIhAUFyZWfhhomZ/thumbs/thumb175x175.webp)
To ensure a proper seal, inspect the O-ring for any debris or damage, apply a thin layer of silicone grease, and securely close the case, ensuring all latches are properly engaged.
The Olympus PT-032 Case is rated for depths up to 40 meters (approximately 131 feet).
To prevent fogging, place anti-fog inserts or silica gel packets inside the case to absorb moisture. Ensure your camera and case are at a similar temperature before sealing.
Rinse the case thoroughly with fresh water to remove any salt or debris. If the problem persists, disassemble the button assembly for cleaning and apply a small amount of silicone grease.
Yes, the Olympus PT-032 Case can be used in both environments. After use, always rinse it with fresh water and dry thoroughly to prevent corrosion.
Store the case in a cool, dry place. Keep the O-ring clean and lightly lubricated with silicone grease. Do not latch the case when storing to prevent unnecessary compression of the O-ring.
Use a silicone-based grease specifically designed for underwater housing O-rings. Avoid petroleum-based products as they can damage the O-ring material.
Perform a leak test by closing the case without the camera inside and submerging it in a bathtub or bucket of water. Look for any air bubbles, which indicate a seal problem.
Immediately exit the water, remove the camera, and dry both the camera and case thoroughly. Inspect the O-ring for damage or debris and replace if necessary before further use.
Yes, the Olympus PT-032 Case has mounting points for accessories like external flashes or lighting arms. Ensure all attachments are secure and designed for use with underwater housings.