Olympus FL-50 Instructions Manual

Pages 36

Year 2003

Language(s)

of 36

Olympus FL-50 Specification

The Olympus FL-50 Flash is a high-performance external flash unit designed for advanced photographers seeking superior lighting control for their Olympus camera systems. This flash unit is engineered to offer a guide number of 50 at ISO 100, ensuring powerful illumination suitable for a wide range of shooting conditions. It supports both TTL automatic flash control and manual flash modes, providing photographers with the flexibility to choose the level of control they desire. The FL-50 is equipped with a swiveling and tilting flash head, allowing for dynamic light direction adjustments and enabling techniques such as bounce flash to soften shadows and achieve more natural lighting effects. Compatible with various Olympus digital and film cameras, the FL-50 is designed to integrate seamlessly into existing setups.

The flash features a built-in wide panel, extending coverage to match lenses as wide as 8mm in 35mm format, and a catchlight panel to enhance portrait photography. Its recycle time is notably efficient, ranging from approximately 1.3 to 5.2 seconds depending on battery type, with power supplied by four AA batteries. The FL-50 is equipped with an intuitive control interface, including an LCD panel for easy setting adjustments and a durable construction to withstand frequent use. Additionally, the flash supports wireless flash operation, enabling it to serve as either a master or slave unit in multi-flash setups, thus expanding creative possibilities. This combination of power, flexibility, and advanced features makes the Olympus FL-50 a valuable tool for photographers aiming to elevate their lighting capabilities.

Olympus FL-50 F.A.Q.

How do I attach the Olympus FL-50 Flash to my camera?

To attach the Olympus FL-50 Flash, slide it onto the camera's hot shoe until it clicks into place. Ensure the flash and camera are turned off before doing so.

What batteries are compatible with the Olympus FL-50 Flash?

The Olympus FL-50 Flash is compatible with four AA-sized alkaline, NiMH, or lithium batteries. Ensure that the batteries are inserted correctly according to the polarity markings.

How do I perform a factory reset on the Olympus FL-50 Flash?

To perform a factory reset on the Olympus FL-50 Flash, press and hold the MODE and LIGHT buttons simultaneously for about 3 seconds until the display resets.

What is the best way to clean the Olympus FL-50 Flash?

Use a soft, dry cloth to gently wipe the exterior of the FL-50 Flash. Avoid using solvents or harsh chemicals. For the flash head, use a lens cleaning brush to remove dust.

How can I avoid overheating the Olympus FL-50 Flash during extended use?

To prevent overheating, avoid firing the flash in rapid succession. Allow the flash to cool down between shots, and do not block any ventilation slots.

How do I use the Olympus FL-50 Flash in wireless mode?

To use the FL-50 in wireless mode, set the flash to RC (remote control) mode and ensure your camera supports wireless flash. Follow the camera's instructions to configure the wireless settings.

What should I do if the Olympus FL-50 Flash does not fire?

Check the battery level and ensure they are properly installed. Verify that the flash is securely attached to the camera and that the camera settings allow flash firing.

How can I adjust the power output on the Olympus FL-50 Flash?

Adjust the power output by pressing the MODE button until you reach the Manual (M) mode, then use the control dial to increase or decrease the power level.

Can the Olympus FL-50 Flash be used with non-Olympus cameras?

Yes, the FL-50 can be used with non-Olympus cameras that have a standard hot shoe, but some advanced features may not be available. Consult the camera's manual for compatibility.

How do I replace the flash tube on the Olympus FL-50?

Replacing the flash tube should be performed by a qualified technician. Contact Olympus support for service options and authorized repair centers.