Olympus FE-46 Instructions Manual

To set the date and time, turn on the camera and press the 'MENU' button. Navigate to the 'Setup' menu using the arrow keys, select 'Date & Time', and follow the on-screen instructions to set the current date and time.
Blurry pictures can be caused by camera shake or improper focus. Ensure you are holding the camera steady or use a tripod. Check that the lens is clean, and ensure proper autofocus by half-pressing the shutter button before taking a picture.
If the camera won't turn on, check if the battery is properly inserted and charged. Try removing and reinserting the battery. If the issue persists, clean the battery contacts and replace the battery if necessary.
Use the USB cable provided with the camera to connect it to your computer. Once connected, turn on the camera. It should be recognized as a removable disk or device. You can then drag and drop photos from the camera to your computer.
The Olympus FE-46 is compatible with SD and SDHC memory cards. Ensure the card is properly inserted into the camera's memory card slot before use.
To reset the Olympus FE-46 to factory settings, go to the 'Setup' menu, find 'Reset', and select 'Yes' to confirm. This will restore all settings to their default values.
Yes, the Olympus FE-46 can use rechargeable NiMH batteries. Ensure they are fully charged before use for optimal performance.
If the LCD screen is not displaying properly, try turning off the camera and removing the battery. Reinsert the battery and turn the camera back on. If the issue continues, the camera may need servicing.
To improve battery life, reduce the use of the flash and LCD screen when not necessary. Turn off the camera when not in use and consider using power-saving modes if available.
Use a soft, lint-free cloth or a lens cleaning brush to gently remove dust and fingerprints from the lens. Avoid using harsh chemicals or rough materials that could scratch the lens.