Olympus C-120 Quick Start Guide
![Olympus C-120 manual cover](/images/bAYSyuVTnwUckpZYluJDqMvV/thumbs/thumb175x175.webp)
To change the resolution settings on the Olympus C-120, turn on the camera and press the "Menu" button. Navigate to the "Image Quality" setting using the arrow keys, then select from available resolutions such as 1600x1200, 1280x960, and 640x480. Press "OK" to confirm your selection.
If the camera won't turn on, first check the battery compartment to ensure the batteries are correctly inserted and have sufficient charge. If the issue persists, try replacing the batteries with new ones. Additionally, inspect the battery contacts for any corrosion or debris and clean them if necessary.
To transfer photos, connect the camera to your computer using a USB cable. Turn the camera on, and your computer should recognize it as a removable drive. Open the drive on your computer and copy the images to your desired location. Ensure the camera is set to "PC" mode in the settings menu if required.
The Olympus C-120 camera is compatible with SmartMedia cards. It supports cards with capacities up to 128MB. Make sure the card is properly formatted in the camera before use.
To reset the camera to factory settings, press the "Menu" button, navigate to the "Setup" menu, and select "Reset". Confirm your selection when prompted. This will restore the default settings, but will not delete any images stored on the memory card.
Blurry pictures can result from camera shake or incorrect focus. Use a tripod or steady surface when shooting. Ensure the autofocus is activated and focused correctly before capturing. Additionally, check the shutter speed; a faster speed can reduce blur in moving subjects or low light conditions.
To extend battery life, use the camera's power-saving features, such as the auto power-off function. Reduce the use of the LCD screen and flash, and operate the camera in moderate temperatures. Consider using high-capacity rechargeable batteries for longer usage.
If the lens is stuck, gently remove any visible debris around the lens area. Turn the camera off and then on again to see if the lens retracts properly. If the problem continues, remove the batteries and reinsert them. If none of these steps work, professional servicing may be required.
To clean the lens, use a soft, lint-free cloth or a lens brush to gently remove dust and smudges. If needed, apply a small amount of lens cleaning solution to the cloth, not directly on the lens, to remove stubborn spots. Avoid using excessive force to prevent scratching the lens.
For low light photography, adjust the ISO to a higher setting to increase sensitivity. Use a slower shutter speed to allow more light, but stabilize the camera to prevent blur. Consider using the flash if necessary, and experiment with exposure compensation to achieve the desired brightness.