Nissan Rogue Hybrid 2018 Dismantling Guide
![Nissan Rogue Hybrid 2018 manual cover](/images/4fc0a1b84f685580e00174e1/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition switch to the ON position. Use the arrow buttons on the steering wheel to select "Settings" on the display. Navigate to "Maintenance" and then "Oil and Filter." Press the ENTER button, then select "Reset" and confirm.
The recommended oil type for the 2018 Nissan Rogue Hybrid is 0W-20 synthetic oil. This ensures optimal engine performance and efficiency.
To check the tire pressure, use a tire pressure gauge on each tire's valve stem. The recommended tire pressure is listed on the driver's side door jamb. For accurate readings, check pressure when tires are cold.
To jump-start, first ensure both vehicles are turned off. Connect the positive jumper cable to the positive terminal of the Rogue's battery, then to the positive terminal of the donor vehicle. Connect the negative cable to the donor vehicle's negative terminal, and the other end to a metal ground on the Rogue, away from the battery. Start the donor vehicle, then the Rogue.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, avoid excessive idling, and use eco mode when driving. Additionally, reduce unnecessary weight and use cruise control on highways when possible.
The 2018 Nissan Rogue Hybrid has a towing capacity of up to 1,100 pounds. Ensure that the trailer and load do not exceed this limit for safe towing.
To replace the cabin air filter, locate the filter housing behind the glove box. Open the glove box, disconnect the dampener arm, and squeeze the sides to drop it down. Remove the filter cover, slide out the old filter, and insert the new one, ensuring correct airflow direction. Reassemble in reverse order.
If the hybrid system warning light illuminates, safely pull over and turn off the engine. Restart the vehicle to see if the light remains on. If it does, consult a Nissan dealer or qualified mechanic to diagnose and address the issue.
To connect your smartphone, turn on Bluetooth in your phone settings. On the Rogue's display, navigate to "Settings," then "Bluetooth," and select "Add Phone." Your vehicle will search for devices; select your phone when it appears, and follow prompts to complete pairing.
A knocking noise may be due to low-quality fuel, incorrect octane rating, or engine issues like worn bearings. Try using a higher octane fuel and see if the noise persists. If it does, have a professional mechanic inspect the engine for further diagnosis.