Chery Tiggo 7 Pro Owner's Manual
![Chery Tiggo 7 Pro Car manual cover](/images/vlaaTNAIvPJQzjQamdqeeflT/thumbs/thumb175x175.webp)
To pair your smartphone, turn on Bluetooth on your phone and navigate to the 'Bluetooth' menu on the Tiggo 7 Pro's infotainment screen. Search for available devices on your phone and select 'Tiggo 7 Pro'. Confirm the pairing code on both devices to establish the connection.
The recommended engine oil for the Chery Tiggo 7 Pro is 5W-30 synthetic oil, which provides optimal performance and protection under various driving conditions. Always refer to the owner's manual for specific recommendations.
To reset the TPMS, ensure all tires are inflated to the recommended pressure. Turn the ignition to the 'ON' position without starting the engine. Press the TPMS reset button, usually located under the steering wheel, until the TPMS indicator blinks three times. Drive the car for a few minutes to complete the reset process.
If the engine fails to start, check the battery to ensure it has sufficient charge. Verify that the fuel level is adequate and that the ignition key or fob is working properly. If the problem persists, consult a professional mechanic or your local Chery dealership.
The Chery Tiggo 7 Pro should be serviced every 10,000 kilometers or every 12 months, whichever comes first. Regular maintenance includes oil changes, brake inspections, and checking fluid levels. Consult the maintenance schedule in the owner's manual for detailed information.
To replace a headlight bulb, turn off the engine and open the hood. Locate the headlight assembly and remove the cover by turning it counterclockwise. Disconnect the electrical connector and remove the old bulb. Insert the new bulb, reconnect the electrical connector, and secure the cover. Test the headlight to ensure proper installation.
If the air conditioning is not cooling effectively, check if the air filter is clean and replace it if necessary. Ensure that the refrigerant levels are adequate. If the issue persists, it may require servicing by a professional to check for leaks or mechanical faults.
To improve fuel efficiency, maintain proper tire pressure, avoid excessive idling, and drive at moderate speeds. Regular maintenance, such as timely oil changes and air filter replacements, can also help enhance fuel economy.
To jump-start the Tiggo 7 Pro, connect the positive cable to the positive terminal of the dead battery, then to the positive terminal of the good battery. Connect the negative cable to the negative terminal of the good battery, and the other end to an unpainted metal surface on the engine block of the dead car. Start the assisting vehicle, then the Tiggo 7 Pro. Remove cables in reverse order after starting.
To check the brake fluid level, open the hood and locate the brake fluid reservoir. Ensure the car is on level ground. Check the fluid level against the 'MIN' and 'MAX' marks on the reservoir. If the level is below 'MIN', add the appropriate brake fluid type as specified in the owner’s manual.