Honda Pilot LX EX SE EX-L and EX-L 2015 Technology Reference Guide

To pair your smartphone, ensure Bluetooth is enabled on your phone. On the Honda Pilot's audio screen, select 'Phone', then 'Yes' to add a new device. Choose your phone from the list and follow the pairing prompts.
Regularly check and change the engine oil every 7,500 miles, inspect the air filter, and replace it if dirty. Ensure coolant levels are adequate, and have the timing belt checked every 60,000 miles.
First, attempt a system reset by turning the car off and on. If this doesn't work, check for software updates or do a factory reset through the settings menu. Consult a dealer if the problem persists.
Check if the system is properly powered on and that the remote control has working batteries. Ensure the correct input source is selected. If issues persist, consult the vehicle's manual or contact a dealer.
Locate the spare tire and jack in the cargo area. Follow the manual to lift the vehicle, remove the flat tire, and replace it with the spare. Tighten the lug nuts in a crisscross pattern and lower the vehicle.
Regularly check the brake fluid level and top it up as needed. Inspect brake pads and rotors every 10,000 miles for wear and replace them if necessary. Have a professional service the brake system annually.
Maintain proper tire pressure, avoid excessive idling, drive at steady speeds, and remove unnecessary weight from the vehicle. Regular maintenance such as oil changes and air filter checks can also help.
Ensure the GPS antenna is not obstructed. Check for software updates for the navigation system. If problems persist, recalibrate the system following the instructions in the vehicle's manual.
Turn the ignition to the 'ON' position without starting the engine. Navigate to the maintenance minder screen using the steering wheel buttons, then hold the 'Select/Reset' button until the indicator resets.
Check the refrigerant level and recharge it if necessary. Ensure the cabin air filter is clean and not blocked. If the problem persists, have a professional inspect the compressor and cooling system.