Nissan Rogue Hybrid 2017 Roadside Assistance Guide
![Nissan Rogue Hybrid 2017 manual cover](/images/22af2214a14ba3fc391ed1a4/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine. Use the navigation button on the steering wheel to navigate to the "Settings" menu on the dashboard. Select "Maintenance," then select "Oil and Filter" or other relevant maintenance item. Press and hold the "OK" button until the maintenance light resets.
The Nissan Rogue Hybrid 2017 is designed to run on regular unleaded gasoline with an octane rating of 87 or higher.
It is generally recommended to change the oil every 5,000 to 7,500 miles or every 6 months, whichever comes first. However, refer to the owner's manual for specific intervals based on driving conditions.
The recommended tire pressure for the Nissan Rogue Hybrid 2017 is typically 33 psi for both the front and rear tires. Always refer to the sticker located on the driver's side doorjamb for precise information.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, avoid excessive idling, use cruise control on highways, and remove unnecessary weight from the vehicle.
If the hybrid system warning light illuminates, it's important to stop the vehicle in a safe location and turn off the engine. Restart the vehicle to see if the light remains on. If it does, consult a Nissan dealer or qualified mechanic to diagnose and address the issue.
Yes, you can tow with the Nissan Rogue Hybrid 2017. The maximum towing capacity is 1,000 pounds. Always ensure that the vehicle is properly equipped for towing and that you adhere to all towing guidelines.
To replace the cabin air filter, locate the filter housing behind the glove compartment. Open the glove compartment and remove the damper cord. Press in on the sides of the glove box to release it and lower it down. Remove the filter cover and slide out the old filter. Insert the new filter, ensuring it is oriented correctly, then replace the cover and glove box.
To jump-start the vehicle, first ensure both vehicles are turned off. Connect the positive (+) cable to the positive terminal of the dead battery, then to the positive terminal of the good battery. Connect the negative (-) cable to the negative terminal of the good battery, and the other end to an unpainted metal surface on the engine block of the dead vehicle. Start the good vehicle, and then start the Rogue. Once started, remove the cables in reverse order.
To update the navigation system, visit the Nissan Navigation Store to check for the latest map updates. Purchase the update, download it onto a USB drive, and follow the on-screen instructions to install it in your vehicle. Ensure the vehicle is turned on and the navigation system is running during the update process.