Murray 46570x6B Parts Manual
![Murray 46570x6B Tractor manual cover](/images/lgYNaPZSoXdiQKwumPdtfCnd/thumbs/thumb175x175.webp)
To start the Murray 46570x6B Tractor, ensure the parking brake is engaged, the PTO switch is off, and the throttle is set to the choke position. Turn the ignition key clockwise to start the engine. Once started, release the key and adjust the throttle to the desired speed.
It is recommended to use SAE 30 motor oil for temperatures above 32°F (0°C) and SAE 5W-30 for temperatures below 32°F (0°C). Always check the owner’s manual for specific oil recommendations.
First, check the battery connections and charge. Ensure the fuel tank is filled and the fuel valve is open. Inspect the spark plug for damage or corrosion. If the problem persists, consult the user manual or contact a professional technician.
Change the oil after the first 5 hours of use, and then every 50 hours of operation or at least once per season. Regular oil changes help maintain engine performance.
To adjust the cutting height, locate the lever on the right side of the tractor. Move the lever to the desired height setting. Ensure the tractor is on a flat surface for accurate adjustments.
Check if the PTO switch is in the "On" position. Ensure the belt is properly tensioned and not damaged. Inspect the safety switches and wiring connections. If necessary, consult the manual or a professional for further assistance.
Regularly clean the battery terminals and ensure they are tightly connected. Keep the battery charged, especially during off-season storage. Use a battery maintainer if the tractor is stored for extended periods.
To replace the air filter, locate the air filter cover on the engine. Remove the cover, take out the old filter, and insert a new one. Secure the cover back in place. Refer to the user manual for specific instructions.
Excessive vibrations can be caused by unbalanced blades, loose parts, or worn components. Check the blades for damage, tighten any loose bolts, and inspect the drive belts. Repair or replace parts as necessary.
Before storing, clean the tractor thoroughly and apply anti-corrosion spray to metal parts. Change the oil and fill the fuel tank, adding a fuel stabilizer. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.