Murray 42L18G60X8A Parts Manual

Pages 29

Year 2023

Language(s)

of 29

Murray 42L18G60X8A Tractor Specification

The Murray 42L18G60X8A Tractor is designed for robust lawn maintenance, combining power, efficiency, and user-friendly features. This model is equipped with an 18.5 HP Briggs & Stratton Intek engine, ensuring reliable performance and longevity. The tractor features a 42-inch steel cutting deck, offering a balanced blend of size and maneuverability, suitable for medium to large lawns. Its twin-blade cutting system delivers a precise and even cut, while the seven-position height adjustment allows users to customize the cutting height between 1.5 to 4 inches.

The transmission system is a hydrostatic drive, providing smooth and effortless speed adjustments without the need for manual shifting. This setup enhances the operator's control and comfort, particularly beneficial during extended mowing sessions. The tractor also includes a comfortable, high-back seat that reduces strain during use, along with an ergonomic steering wheel designed for ease of handling.

For added versatility, the Murray 42L18G60X8A supports a range of attachments, such as baggers, mulchers, and snow throwers, making it a multi-seasonal tool. The tractor's durable construction includes a robust frame and corrosion-resistant finish, ensuring it withstands various weather conditions and terrains. Maintenance is streamlined with easily accessible service points, allowing for quick checks and adjustments.

Safety features include an operator presence control system, which automatically shuts off the engine and blades if the driver leaves the seat, enhancing operational safety. Additionally, the tractor is equipped with headlights for improved visibility during low-light conditions. The Murray 42L18G60X8A Tractor represents a blend of practical engineering and thoughtful design, catering to both residential and light commercial lawn care needs.

Murray 42L18G60X8A Tractor F.A.Q.

How do I change the oil in my Murray 42L18G60X8A tractor?

To change the oil, first run the engine for a few minutes to warm it up, then turn it off. Locate the oil drain plug under the engine, place a pan under it, and remove the plug. Allow the oil to drain completely. Replace the drain plug, and refill with new oil as specified in your manual.

What should I do if my tractor won't start?

If the tractor won't start, check the battery connections to ensure they are clean and tight. Verify that the battery is charged. Check the fuel level and ensure the fuel shutoff valve is open. Inspect the spark plug for wear and replace if necessary.

How can I maintain the blades on my Murray tractor?

Regularly check the blades for sharpness and damage. Sharpen or replace them as needed. Clean the blades after each use to prevent rust. Ensure they are properly balanced when reinstalling.

What type of fuel is recommended for the Murray 42L18G60X8A?

Use unleaded gasoline with a minimum octane rating of 87. Avoid using fuel that contains more than 10% ethanol.

How do I adjust the cutting height of my tractor?

To adjust the cutting height, locate the lever on the side of the tractor. Move the lever to the desired position to raise or lower the deck. Make sure both sides are set to the same height for an even cut.

What should I check if the mower deck is vibrating excessively?

Excessive vibration can be caused by unbalanced blades, damaged pulleys, or worn-out belts. Check the blades for balance and damage. Inspect the pulleys and belts for wear and replace as necessary.

How can I improve the traction of my Murray tractor on slopes?

To improve traction, ensure the tires are properly inflated. Use tire chains if necessary. Adjust the weight distribution by adding wheel weights or ballast to the rear of the tractor.

What regular maintenance should be performed on the tractor's engine?

Regular maintenance includes changing the oil and oil filter, cleaning or replacing the air filter, checking spark plugs, and inspecting the fuel system. Follow the maintenance schedule in the owner's manual.

How do I clean the air filter on my Murray 42L18G60X8A?

Locate the air filter housing on the engine. Remove the cover and take out the air filter. If it's a paper filter, tap it gently to remove dirt. If it's a foam filter, wash it with mild detergent and water, then allow it to dry before reinstalling.

What should I do if the tractor's transmission is not engaging properly?

Check the transmission fluid level and ensure it is at the correct level. Inspect the drive belt for wear and proper tension. If problems persist, consult the manual or a professional technician.