Murray 46567x6B Parts Manual
![Murray 46567x6B Tractor manual cover](/images/SRTnmFwEgPGwEfiJQBRxiggU/thumbs/thumb175x175.webp)
To start the Murray 46567x6B Tractor, ensure the parking brake is engaged and the gear shift lever is in neutral. Insert the key into the ignition and turn it to the 'Start' position until the engine fires up. Release the key to the 'Run' position once the engine starts.
If the tractor won't start, check if the battery is charged and connections are secure. Ensure the fuel tank has gasoline and the fuel valve is open. Verify that the safety switches are not engaged. If the issue persists, consult the manual or contact a professional technician.
The oil in the Murray 46567x6B Tractor should be changed every 50 hours of operation or at least once a season. Always refer to the owner's manual for specific maintenance intervals and oil type recommendations.
The recommended oil type for the Murray 46567x6B Tractor is SAE 30 for temperatures above 32°F (0°C) and SAE 5W-30 for temperatures below 32°F (0°C). Always check the manual for specific recommendations.
To adjust the cutting height on your Murray 46567x6B Tractor, locate the height adjustment lever on the right side of the mower deck. Move the lever to your desired cutting height position. Ensure the engine is off and the blades are not spinning when making adjustments.
If the blades don't engage, check the PTO (Power Take-Off) switch and ensure it is in the 'On' position. Inspect the drive belt for wear or damage. Make sure the safety interlock system is functioning correctly. If problems persist, consult a professional technician.
To troubleshoot uneven cutting, ensure the tire pressure is equal on all tires, and the mower deck is level. Inspect the blades for sharpness and any damage. Clean any debris buildup under the deck. If the problem continues, consult a professional for further inspection.
To store the Murray 46567x6B Tractor for the winter, clean the tractor thoroughly, change the oil, and fill the fuel tank with stabilized gasoline. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
Before each use, check the oil level, inspect the air filter, and ensure the tires are properly inflated. Verify the blades are sharp and secure. Examine the belts and cables for any signs of wear or damage.
To replace the air filter, locate the air filter cover on the side of the engine. Remove the cover and take out the old filter. Insert the new filter and replace the cover securely. Refer to the manual for specific instructions and filter type.