Murray 46501x92A Parts Manual
![Murray 46501x92A Tractor manual cover](/images/ysGzlBPhXlUZUlXTdOcuvgjq/thumbs/thumb175x175.webp)
To start the Murray 46501x92A Tractor, ensure the gear shift is in neutral, engage the brake, and turn the ignition key to the start position.
Use SAE 30 oil for temperatures above 32°F (0°C) and SAE 5W-30 for temperatures below 32°F (0°C).
Sharpen the blades approximately every 25 hours of use or at the beginning of each mowing season for optimal performance.
The recommended tire pressure is 14 psi for the front tires and 10 psi for the rear tires.
Check the battery connections, ensure there is fuel in the tank, inspect the spark plug, and verify that the safety switches are engaged.
Regular maintenance includes changing the oil, replacing the air filter, inspecting the spark plug, and checking the blades and belts for wear.
Use the height adjustment lever located on the tractor to set the desired cutting height. Ensure the tractor is on a flat surface when adjusting.
Stop the tractor immediately, allow the engine to cool, and check for obstructions in the air vents and ensure proper oil and coolant levels.
Remove the mower deck, release the belt tensioner, and carefully remove the old belt. Install the new belt following the routing diagram.
To winterize, clean the tractor thoroughly, drain the fuel system, change the oil, and store the tractor in a dry place. Disconnect the battery if storing for extended periods.