Murray 42583x6B Parts Manual
![Murray 42583x6B Tractor manual cover](/images/fFGtBwOsqZSlnXYgZiamiRnx/thumbs/thumb175x175.webp)
To start the Murray 42583x6B Tractor, ensure that the brake is engaged, the throttle is set to 'choke' position for a cold start, and turn the ignition key to the 'start' position. Release the key as soon as the engine starts.
The recommended oil for the Murray 42583x6B Tractor is SAE 30 for temperatures above 32°F and SAE 5W-30 for colder temperatures.
Check the battery terminals for corrosion and ensure they are tightly connected. Verify the alternator and voltage regulator are functioning correctly and replace any faulty components.
The recommended tire pressure for the Murray 42583x6B Tractor is 14 PSI for the front tires and 10 PSI for the rear tires.
Regular maintenance includes changing the oil every 50 hours, checking and replacing the air filter, inspecting spark plugs, and lubricating all moving parts as per the manual.
Check the blade engagement cable for proper tension and inspect the PTO switch for functionality. Ensure the deck is clear of debris and belts are in good condition.
To adjust the cutting height, use the lever located on the right side of the tractor. Move the lever to the desired height position, ranging from 1.5 to 4 inches.
Clean the tractor thoroughly to remove grass and debris. Drain the fuel tank or add a fuel stabilizer, disconnect the battery, and store the tractor in a dry, sheltered area.
First, remove the mower deck. Then, release the tension on the belt, remove the old belt from the pulleys, and install the new belt following the same path. Reattach the deck and ensure the belt is properly aligned.
Check the air filter for cleanliness, inspect the spark plug for wear or damage, and ensure the fuel is fresh. Clean or replace components as necessary to improve engine performance.