Murray 40319x98C Parts Manual
![Murray 40319x98C Tractor manual cover](/images/juOsQteYkkDIqBEXOokkxMag/thumbs/thumb175x175.webp)
To start the Murray 40319x98C Tractor, ensure the parking brake is engaged, the PTO is off, and the throttle is set to the choke position. Turn the ignition key to the start position until the engine runs, then release it to the run position.
The recommended oil type for the Murray 40319x98C Tractor is SAE 30 for temperatures above 32°F and SAE 5W-30 for temperatures below 32°F.
The oil in your Murray 40319x98C Tractor should be changed every 50 hours of operation or at the beginning of each mowing season.
If the tractor won't start, check the battery connections for corrosion, ensure the fuel tank has gas, and verify that the spark plug is clean and properly connected.
To maintain the blades, regularly inspect them for damage, and sharpen or replace them as needed. Ensure the blades are properly balanced to avoid vibration.
If you experience steering issues, check for loose or damaged steering components, ensure the tires are properly inflated, and lubricate the steering mechanism.
The recommended tire pressure for the front tires is 14 PSI and for the rear tires is 10 PSI.
To clean the air filter, remove it from the engine, tap it lightly to remove loose dirt, and wash it with soapy water if necessary. Let it dry completely before reinstalling.
If the mower deck does not engage, check the PTO switch, inspect the drive belt for wear or damage, and ensure all deck components are properly connected.
To store the tractor, clean it thoroughly, change the oil, add fuel stabilizer, and store it in a dry, covered area. Disconnect the battery if storing for an extended period.