Murray 38705x30A Parts Manual
![Murray 38705x30A Tractor manual cover](/images/XIuxaeqcDVcJceosQQrTQAHC/thumbs/thumb175x175.webp)
Ensure the tractor is on a flat surface, set the parking brake, move the throttle to the 'fast' position, turn the ignition key to the 'start' position, and release once the engine starts.
Check the battery connections for corrosion, ensure the fuel tank is not empty, verify the spark plug condition, and inspect the fuse.
Change the oil after the first 5 hours of use and then every 50 hours of operation or annually, whichever comes first.
Use SAE 30 oil for general use, or SAE 5W-30 for colder temperatures. Always refer to the operator’s manual for specific recommendations.
Locate the cutting height adjustment lever on the side of the tractor, and move it to the desired position. Ensure the tractor is off and parked on a level surface before making adjustments.
Disconnect the spark plug, lift the tractor safely, remove the blade bolt with a wrench, replace the blade, and securely tighten the bolt.
Check if the tires are properly inflated, ensure the deck is level, and inspect the blades for sharpness and damage.
Regularly check and clean the air filter, change the oil, sharpen the blades, inspect belts for wear, and lubricate all moving parts.
Remove the mower deck, release the tension on the belt, remove the old belt, and install the new belt following the belt routing diagram. Reattach the deck once complete.
Check for fuel quality and level, ensure the air filter is clean, inspect the spark plug, and verify there is no debris obstructing the air intake.