Murray 38519x58B Parts Manual
![Murray 38519x58B Tractor manual cover](/images/TkkFNmQiBtngXjhXetkGHmWL/thumbs/thumb175x175.webp)
To start the Murray 38519x58B Tractor, ensure the transmission is in neutral, engage the parking brake, and turn the ignition key to the start position. Release the key once the engine starts.
The recommended oil for the Murray 38519x58B Tractor is SAE 30 for temperatures above 32°F, and SAE 5W-30 for temperatures below 32°F.
It is recommended to change the oil every 50 hours of operation or once per mowing season, whichever comes first.
If the tractor won't start, check the battery connections, ensure the fuel is fresh, and verify the spark plug is in good condition. Also, make sure the parking brake is engaged and the PTO is disengaged.
To sharpen the mower blades, remove them from the mower deck, secure them in a vice, and sharpen using a file or grinder. Balance the blades before reinstallation.
Check if the mower deck is level, ensure the blades are sharp and balanced, and make sure the tire pressure is even on all sides.
The recommended tire pressure for the Murray 38519x58B Tractor is usually around 10 psi for the front tires and 14 psi for the rear tires. Always verify with the manual.
Remove the air filter cover, take out the filter, and clean it using compressed air or replace it if it is too dirty. Reinstall it securely.
Check the transmission drive belt for wear or damage and replace it if necessary. Verify that the belt tension is correct and inspect for any transmission fluid leaks.
Clean the tractor thoroughly, change the oil, add a fuel stabilizer to the gas tank, remove the battery, and store it in a dry place. Cover the tractor to protect it from dust and moisture.