Murray 38515x92A Parts Manual
![Murray 38515x92A Tractor manual cover](/images/SyIEeSbUmavigehCiMEslnSz/thumbs/thumb175x175.webp)
To start the Murray 38515x92A Tractor, ensure the parking brake is engaged, the PTO switch is off, and the gear shift lever is in neutral. Insert the key into the ignition and turn it to the start position while holding down the brake pedal.
For optimal performance, use SAE 30 motor oil above 32°F and SAE 5W-30 below 32°F. Always refer to the owner's manual for specific recommendations.
Check the battery connections for corrosion, ensure the fuel tank has gasoline, and inspect the spark plug for wear. Also, verify that safety switches are engaged.
Blades should be sharpened every 25 hours of operation or whenever you notice uneven cutting. Regular maintenance ensures optimal cutting performance.
The recommended tire pressure is typically 14 PSI for the front tires and 10 PSI for the rear tires. Always check the sidewall of the tire or the owner's manual for confirmation.
Locate the air filter housing, remove the cover, and take out the old filter. Insert a new filter of the same type, ensuring it fits snugly, then replace the cover.
Clean the tractor thoroughly, change the oil, drain the fuel or add a stabilizer, remove the battery and store it in a warm place, and cover the tractor to protect it from the elements.
To adjust the deck height, use the lever located on the right side of the tractor. Move the lever to your desired position to raise or lower the cutting deck.
Excessive vibration can be caused by unbalanced blades, loose parts, or damaged belts. Inspect and balance the blades, tighten any loose parts, and replace damaged belts.
Keep the battery terminals clean and free of corrosion, ensure it is charged during the off-season, and check the electrolyte levels regularly, adding distilled water if necessary.