Mitsubishi Electric FX3G 232 BD Installation Manual

Mitsubishi Electric FX3G 232 BD manual cover

Pages 1

Year 2018

Language(s)

of 1

Mitsubishi Electric FX3G 232 BD Specification

The Mitsubishi Electric FX3G 232 BD is an advanced communication board designed to enhance the connectivity options of the FX3G series programmable logic controllers (PLCs). It facilitates seamless RS-232 communication, enabling the PLC to interface with various peripheral devices such as computers, printers, or bar code readers. This communication board allows for the transmission and reception of data at speeds up to 115.2 kbps, ensuring efficient data exchange for industrial applications.

The FX3G 232 BD integrates directly with the FX3G PLC, expanding its communication capabilities without requiring additional space for installation, as it mounts directly onto the main unit. It supports a range of communication protocols, including Modbus, enabling versatile connectivity for diverse industrial setups. The board is designed with robust electrical isolation, providing protection against potential electrical interference and ensuring reliable operation in industrial environments.

The FX3G 232 BD is engineered for ease of use, with straightforward configuration settings accessible through the PLC programming software, allowing users to quickly set up and customize communication parameters to suit their specific requirements. The compact design and high functionality make it a cost-effective solution for enhancing the communication capacity of the FX3G PLC systems. Compatibility with existing Mitsubishi software and hardware ensures seamless integration, minimizing downtime and facilitating quick deployment in various automation scenarios. This communication board exemplifies Mitsubishi Electric's commitment to providing innovative, reliable, and user-friendly solutions for industrial automation challenges.

Mitsubishi Electric FX3G 232 BD F.A.Q.

How do I connect the FX3G-232-BD module to a PC?

To connect the FX3G-232-BD module to a PC, use an RS-232 cable. Ensure that the communication parameters, such as baud rate, data bits, stop bits, and parity, match between the PLC and the PC. Use Mitsubishi's programming software to establish the connection.

Can the FX3G-232-BD module be used for Modbus communication?

Yes, the FX3G-232-BD can be configured for Modbus RTU communication. You will need to set the correct parameters in the PLC program using the appropriate Mitsubishi Electric software.

What troubleshooting steps should I follow if the module does not communicate?

Check the wiring connections and ensure the RS-232 cable is properly connected. Verify that the communication parameters match on both devices. Check for any fault indicators on the module and ensure the module is correctly installed on the FX3G base unit.

How do I install the FX3G-232-BD module on the FX3G PLC?

Power off the PLC, then attach the FX3G-232-BD module to the left side of the FX3G base unit. Secure it using the provided screws and ensure it is firmly connected before powering the PLC back on.

What are the main features of the FX3G-232-BD module?

The FX3G-232-BD module provides an RS-232 communication interface for the FX3G PLC, supporting serial communication with various devices. It offers flexible configuration and supports protocols such as Modbus RTU.

How can I update the firmware of the FX3G PLC with the FX3G-232-BD module attached?

To update the firmware, disconnect any connected devices from the FX3G-232-BD module. Use Mitsubishi's programming software to download the firmware update via the main programming port of the PLC.

Is it possible to use the FX3G-232-BD module for data logging applications?

Yes, the module can be used to send data to a PC or other data logging device via RS-232. Ensure appropriate software is used to capture and log the data transmitted from the FX3G PLC.

What maintenance is required for the FX3G-232-BD module?

Regularly check connections and cables for wear and tear. Ensure the module is free from dust and debris. Periodically verify communication settings and update them as necessary to match connected devices.

Can I use multiple FX3G-232-BD modules with a single FX3G PLC?

No, only one FX3G-232-BD module can be used per FX3G PLC as it connects directly to the left-side expansion port of the base unit.

How do I reset the communication settings on the FX3G-232-BD module?

Resetting communication settings requires reconfiguring the parameters through the PLC program using Mitsubishi's software. Adjust the settings to the required defaults and download the configuration to the PLC.