Mercedes-Benz AMG GT S 2016 Operating Instructions

To check the engine oil level, park your AMG GT S on a level surface, turn off the engine, and wait for about 5 minutes for the oil to settle. Use the electronic oil level feature accessible through the car's onboard computer. Navigate to the service menu and select 'Oil Level Check'.
The recommended tire pressure for the AMG GT S 2016 is typically 32 psi for the front tires and 36 psi for the rear tires. However, always refer to the sticker located on the driver's side door frame or the owner's manual for the specific values.
First, try restarting the vehicle to see if the system resets. If the issue persists, check the fuses related to the infotainment system. If none of these solutions work, consider performing a factory reset from the settings menu or contact a Mercedes-Benz service center.
The AMG GT S requires a service every 10,000 miles or once a year, whichever comes first. This includes oil and filter changes, brake fluid checks, and inspections of key systems. A more comprehensive service is needed every 20,000 miles. Consult your owner's manual for detailed maintenance tasks.
A rough idle may be caused by issues such as spark plug faults, fuel injector problems, or air intake leaks. Inspect these components for any visible issues. If the problem continues, it is recommended to visit an authorized service center for a thorough diagnostic.
To update the navigation system, download the latest map data from the Mercedes-Benz website onto a USB drive. Insert the USB drive into the car's USB port and follow the on-screen instructions to complete the update process. Alternatively, visit a Mercedes-Benz dealership for assistance.
The 2016 AMG GT S requires premium unleaded gasoline with an octane rating of 91 or higher. Using lower octane fuel can lead to reduced performance and potential engine damage. Always refer to the owner's manual for the best fuel recommendations.
To replace the air filter, open the hood and locate the air filter housing. Unscrew the housing cover, remove the old filter, and insert the new one, ensuring it is seated properly. Replace the cover and tighten the screws. Consult the owner's manual for specific instructions and diagrams.
A squealing noise during braking is often due to worn brake pads or rotors. Inspect the brake components and replace them if necessary. If the noise persists after replacement, check for debris or consult a professional mechanic for further inspection.
To pair your smartphone, go to the Bluetooth settings on your phone and ensure it is discoverable. On the car's infotainment system, navigate to the Bluetooth menu and select 'Pair New Device'. Follow the prompts to complete the pairing process. Consult your owner's manual for detailed steps.