Mercedes-Benz CLS Coupe 2016 Operating Instructions
![Mercedes-Benz CLS Coupe 2016 manual cover](/images/40fe168d4de820939d9683fc/thumbs/thumb175x175.webp)
To reset the service light, turn the ignition to position 1 (do not start the engine). Use the left-hand buttons on the steering wheel to navigate to the trip odometer. Press and hold the call button and the OK button on the steering wheel simultaneously until the workshop menu appears. Scroll to "Assyst Plus," confirm with OK, select "Full Service," confirm, then select "Confirm Service" and confirm again.
Mercedes-Benz recommends using synthetic motor oil with a viscosity grade of 5W-40 or 0W-40 meeting MB 229.5 or MB 229.51 specifications for the CLS Coupe 2016. Refer to the owner's manual for specific recommendations.
To pair your phone, ensure Bluetooth is enabled on your device. In the COMAND system, select "Telephone" then "Connect Device." Choose "Search for Phones" and select your phone from the list. Confirm the passkey on both the phone and the vehicle's screen, then accept the pairing request on your phone.
The recommended tire pressure for the CLS Coupe 2016 is typically 33 PSI for the front tires and 36 PSI for the rear tires. Always check the sticker on the driver's side door jamb for the exact specifications for your model and tire size.
To replace a headlight bulb, first, turn off the engine and open the hood. Locate the back of the headlight assembly, remove the dust cover, and disconnect the electrical connector. Remove the old bulb by turning it counterclockwise. Insert the new bulb, ensuring it is securely in place, reconnect the connector, and replace the dust cover.
It is recommended to change the air filter every 15,000 to 30,000 miles, depending on driving conditions. Check the air filter during regular maintenance and replace it if it's dirty or clogged to ensure optimal engine performance.
The 2016 CLS Coupe typically does not have a transmission dipstick. Checking the fluid level requires lifting the vehicle and accessing the transmission fill plug. It's recommended to have this checked by a qualified technician.
To enable or disable the ECO start/stop function, press the ECO button located on the center console. The button will illuminate when the feature is active, and turn off when deactivated.
If the check engine light comes on, first check for any loose fuel caps as this is a common cause. If the light remains on, it's advisable to have the vehicle diagnosed by a professional to read the fault codes and address any underlying issues.
To update the navigation system, you can purchase the latest map update from a Mercedes-Benz dealership or online. Follow the instructions provided with the update package, often involving inserting an SD card or USB into the vehicle's system and following the on-screen prompts.