Mercedes-Benz C-Class 2016 Operating Instructions
![Mercedes-Benz C-Class 2016 manual cover](/images/2a71b7579ae8bc0ee37ccfa4/thumbs/thumb175x175.webp)
To reset the service light, turn the ignition to position 1, press the 'answer call' button and 'OK' on the steering wheel simultaneously, navigate to 'ASSYST PLUS' using the menu, then select 'Full Service' and confirm reset.
It is recommended to use synthetic oil with a viscosity grade of 5W-40 or 0W-40 that meets Mercedes-Benz specification 229.5.
Enable Bluetooth on your phone, navigate to the 'Telephone' menu on the COMAND system, select 'Connect Device', and follow prompts to pair. Enter the passcode if required.
The recommended tire pressure is typically 30-35 psi for front and rear tires, but it's best to verify using the sticker on the driver's side door jamb.
To replace the key fob battery, remove the mechanical key, open the battery compartment using the key, and replace the old CR2025 battery with a new one.
If the check engine light illuminates, check for any obvious issues like a loose gas cap. If unresolved, consult a Mercedes-Benz technician for diagnostics.
To enable ECO start/stop, press the ECO button located on the dashboard. The system will automatically activate when conditions are favorable for fuel-saving.
To update the navigation system, purchase the latest map update from the Mercedes-Benz website or dealer, and install it via the SD card slot or USB port as per instructions.
The towing capacity for a 2016 Mercedes-Benz C-Class is approximately 1,600 kg (3,527 lbs) when properly equipped. Always consult the owner's manual for specific guidelines.
To change the air filter, open the hood, locate the air filter housing, unclip the cover, remove the old filter, and replace it with a new one ensuring it is seated properly.