LG 86UU340C 86UU340C.AUS Quick Setup Guide
![LG 86UU340C 86UU340C.AUS TV manual cover](/images/gMRjVoLtYuKhDRTtiYgsDqiJ/thumbs/thumb175x175.webp)
To connect your LG 86UU340C TV to Wi-Fi, press the Settings button on your remote, navigate to Network, then select Wi-Fi Connection. Choose your network from the list and enter the password if prompted.
If your TV screen is flickering, try adjusting the picture settings. Go to Settings > Picture > Picture Mode Settings and try different modes. Ensure that all cables are securely connected and try a different input source to rule out connectivity issues.
To perform a factory reset, press the Settings button on your remote, select All Settings > General > Reset to Initial Settings. Confirm to proceed with the reset, which will restore the TV to its original settings.
For optimal picture quality, use the ISF Expert (Bright Room) or ISF Expert (Dark Room) modes found in Settings > Picture > Picture Mode Settings. Adjust brightness, contrast, and color settings according to your viewing environment.
To update the firmware, press the Settings button, go to All Settings > General > About This TV, and select Check for Updates. If an update is available, follow the on-screen instructions to install it.
Ensure the volume is not muted and is set to a reasonable level. Check if the TV is set to the correct audio output in Settings > Sound. Verify that all audio cables are properly connected.
To enable subtitles, press the Settings button, navigate to Accessibility, and select Subtitle. Turn it on and adjust settings as needed.
Check if the power cord is securely connected and if the outlet is working. Try a different outlet or power strip. If the TV still won't turn on, perform a power reset by unplugging it for a few minutes before plugging it back in.
Press the Settings button, select Picture, then Aspect Ratio. Choose the desired aspect ratio such as 16:9, 4:3, or Just Scan depending on your content type.
Yes, you can connect Bluetooth devices. Go to Settings > Sound > Sound Out, select Bluetooth, and pair your device following the on-screen instructions.