Kohler EZT715 Owner's Manual
![Kohler EZT715 Engine manual cover](/images/QVKwwTzqkOsCrwhxTyhVfQie/thumbs/thumb175x175.webp)
Kohler recommends using SAE 10W-30 oil for the EZT715 engine. Make sure to check the oil level regularly and change the oil as per the maintenance schedule in the owner's manual.
The air filter should be checked every 25 hours of operation and replaced every 100 hours or annually, whichever comes first. Operating in dusty conditions may require more frequent maintenance.
Common reasons for starting issues include a dead battery, stale fuel, a clogged air filter, or a faulty spark plug. Ensure all these components are in good condition and functioning properly.
Check for debris blocking the cooling fins and ensure the fan is operating correctly. Verify that the oil level is adequate and use the correct oil type. If the problem persists, consult a professional technician.
The recommended spark plug gap for the Kohler EZT715 engine is 0.030 inches (0.76 mm). Ensure the spark plug is clean and properly gapped to maintain optimal engine performance.
Regular maintenance such as changing the air filter, spark plug, and oil can improve fuel efficiency. Additionally, ensure the engine is not overloaded and operate at optimal throttle settings.
Black smoke typically indicates a rich fuel mixture. Check the air filter for clogs and ensure the carburetor is correctly adjusted. If issues persist, consult the service manual or a professional technician.
Run the engine until it stops from fuel starvation, or use a fuel siphon pump to remove fuel. Always add a fuel stabilizer to any remaining fuel in the tank to prevent degradation during storage.
To replace the fuel filter, first, ensure the engine is cool. Clamp the fuel line, remove the old filter, and install the new one in the correct direction. Ensure all connections are secure before starting the engine.
Locate the idle speed adjustment screw on the carburetor. Turn it clockwise to increase the idle speed or counterclockwise to decrease it. Refer to the service manual for specific rpm settings.