KitchenAid KRSC700HPS Dispensing Guide

To reset the water filter indicator, press and hold the "Filter Reset" button for 3 seconds. The indicator light should turn off.
Check if the refrigerator is plugged in and the circuit breaker is not tripped. Ensure the temperature settings are correct and the vents inside the fridge are not blocked.
It is recommended to clean the condenser coils every 6 to 12 months to ensure optimal performance.
Water pooling can be due to a blocked defrost drain. Try clearing the drain with warm water or a pipe cleaner.
To adjust the shelves, tilt the shelf up at the front, then lift it out of the shelf supports. Position the shelf at the desired height and lower it onto the supports.
The "PO" error code indicates a power outage. Press any button to reset the error code and clear the display.
Unplug the refrigerator, remove the light shield if necessary, and replace the bulb with a new one of the same wattage. Reattach the shield and plug the refrigerator back in.
The KitchenAid KRSC700HPS is compatible with the EveryDrop® Filter 1. Ensure you use this filter for best results.
To activate Sabbath Mode, press and hold the "Sabbath Mode" button for 3 seconds. The display will show "SAb" when the mode is activated.
Ensure the ice maker is turned on and the water supply line is connected. Check if the ice maker's arm is down and not blocked.