Jura Giga X3 Instruction Manual
![Jura Giga X3 Coffee Machine manual cover](/images/a586fcd5e092c339060ef46e/thumbs/thumb175x175.webp)
To clean the Jura Giga X3, start by running the cleaning program via the machine's menu. Use Jura cleaning tablets and follow the on-screen instructions, ensuring to regularly empty the drip tray and waste container.
Ensure the machine's temperature settings are correctly configured in the menu. Pre-warm cups by rinsing them with hot water and regularly descale the machine to optimize heating efficiency.
Adjust the coffee strength by navigating to the 'Product Settings' menu. Here, you can customize the coffee strength by selecting the desired amount of coffee grounds per cup.
This message indicates that the water filter needs to be replaced or was not installed correctly. Replace the filter with a new Jura Claris Smart filter and ensure it clicks into place securely.
Descale the Jura Giga X3 as per the frequency indicated on the machine's display, typically every 2-3 months, depending on water hardness and usage. Use Jura descaling tablets for optimal results.
Connect the milk frother to the machine, place the milk container under the frother, and select the milk frothing option from the menu. Adjust settings for froth consistency if needed.
If the grinder is not working, check for blockages and clean any coffee residue. Adjust the grind setting only while the grinder is operating and ensure the bean container is not empty.
After daily use, clean the milk system, empty the drip tray and grounds container, and wipe down the exterior. Regularly check for any coffee buildup in the brewing unit.
Access the 'Maintenance' section in the machine's settings menu, where you can set reminders for cleaning, descaling, and filter replacement based on your usage preferences.
Check if the water tank is properly seated and inspect the water lines for any visible damage or blockages. If the issue persists, contact Jura customer support for assistance.