Jura ENA 3 Instruction Manual

Pages 35

Year 2017

Language(s)

of 35

Jura ENA 3 Coffee Machine Specification

The Jura ENA 3 Coffee Machine is a compact and efficient coffee solution designed to deliver high-quality coffee experiences at home or in the office. This machine boasts a sleek and modern design, featuring a slim profile that fits seamlessly into small spaces without sacrificing performance. At its core, the ENA 3 is powered by Jura's advanced brewing technology, which includes a high-performance pump capable of delivering 15 bars of pressure to ensure optimal extraction and rich, flavorful coffee. It is equipped with a conical burr grinder that allows for precision grinding of coffee beans, offering multiple grind settings to customize the strength and flavor profile of each brew.

The Jura ENA 3 is designed with user convenience in mind, offering a straightforward interface with push-button controls and a clear digital display, making it easy to select and customize beverage options. The machine supports both single and double-shot espresso preparation and features an adjustable spout height to accommodate various cup sizes. It also includes a built-in milk frother for preparing cappuccinos and lattes, with a fine foam technology that produces a creamy and smooth milk froth.

The water reservoir has a capacity of approximately 1.1 liters, and the bean hopper holds up to 125 grams of coffee beans, ensuring that the machine is ready for multiple servings without frequent refills. Maintenance is simplified with automatic cleaning and descaling programs, ensuring the longevity and consistent performance of the machine. The Jura ENA 3 is an excellent choice for coffee enthusiasts seeking an easy-to-use, space-saving machine that delivers consistently high-quality coffee and espresso beverages.

Jura ENA 3 Coffee Machine F.A.Q.

How do I descale the Jura ENA 3 coffee machine?

To descale the Jura ENA 3, first turn off the machine and remove the water filter if present. Fill the water tank with a descaling solution and water as per the manufacturer's instructions. Place a container under the coffee spout, turn the machine on, and follow the descaling prompts on the display panel. Make sure to rinse the water tank thoroughly after descaling.

What should I do if the Jura ENA 3 is not brewing coffee?

If the Jura ENA 3 is not brewing coffee, check if the water tank is filled and properly seated. Ensure that the coffee beans are loaded and not jammed. Clean the machine's spouts and check for any blockages. If the problem persists, perform a reset as per the user manual instructions.

How can I adjust the coffee strength on my Jura ENA 3?

To adjust the coffee strength on the Jura ENA 3, use the rotary switch to select your preferred coffee strength before pressing the brew button. The machine offers multiple strength settings, which can be adjusted by turning the dial.

Why is my Jura ENA 3 displaying an 'Empty Tray' message even when the tray is empty?

If the 'Empty Tray' message persists, ensure that the drip tray and coffee grounds container are correctly positioned. Clean the tray sensors located where the tray sits. If the issue continues, a sensor reset may be needed, which can be found in the troubleshooting section of the user manual.

Can I use ground coffee in the Jura ENA 3?

Yes, the Jura ENA 3 allows the use of pre-ground coffee. Open the ground coffee chute located at the top of the machine, add one scoop of ground coffee, and select the ground coffee option on the display before brewing.

How often should I clean the Jura ENA 3 coffee machine?

It is recommended to clean the Jura ENA 3 coffee machine daily by wiping the exterior and emptying the drip tray and coffee grounds container. The brewing unit should be cleaned weekly, and a full descaling should be performed every 2-3 months, depending on usage and water hardness.

What should I do if my Jura ENA 3 is leaking water?

Inspect the water tank for cracks or improper seating. Check the drip tray and coffee grounds container for overflows. Ensure all removable components are correctly installed and clean any clogged spouts or seals. If the problem persists, professional servicing may be required.

How do I reset the Jura ENA 3 to its factory settings?

To reset the Jura ENA 3 to factory settings, turn the machine off, press and hold the "P" button, and then turn the machine back on while holding the button. Continue holding the button until the display shows the reset confirmation message. Follow on-screen instructions to confirm the reset.

Can I adjust the froth density on the Jura ENA 3?

Yes, you can adjust the froth density on the Jura ENA 3 by altering the milk frother settings. Use the rotary dial to select the milk froth option and adjust the density to your preference before starting the frothing process.

What maintenance does the Jura ENA 3 require for optimal performance?

Regular maintenance includes daily cleaning of removable parts, weekly cleaning of the brewing unit, and periodic descaling every 2-3 months. It's also important to replace filters as indicated and check for software updates from Jura for optimal performance.